[asterisk-users] Asterisk 16.2.1: P-Asserted-Id set to s when Dialing inside a certain Gosub

[Olivier]

Hello,

With Debian Buster's Asterisk 16.2.1, please consider the following dialplan
;Case A
;exten = 29,1,Dial(PJSIP/${EXTEN})
;Case B
;exten = 29,1,Gosub(foo,${EXTEN},1)
;Case C
exten = 29,1,Gosub(bar,s,1(${EXTEN}))

[foo]
exten = _X.,1,Dial(PJSIP/${EXTEN})
same = n,Return()

[bar]
exten = s,1,Set(TGT=${ARG1})
same = n,Dial(PJSIP/${TGT})
same = n,Return()

When running case A et B, dialing phone gets a Ringing signal from Asterisk
with a P-Asserted-Id
header set to 29: this is expected.

When running case C, dialing phone gets a Ringing signal from Asterisk with
a P-Asserted-Id
header set to s: this is not what I expected.


Thoughts ?
Is there a way to work around this without using pattern B above ?

Best regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20201208/6071348c/attachment.html>