[asterisk-users] [External] 180 Ringing missing
marek
cervajs64 at gmail.com
Tue Dec 1 09:14:58 CST 2020
i know
but there is some existing integration based on AMI event NewExten
https://wiki.asterisk.org/wiki/display/AST/Asterisk+13+ManagerEvent_NewExten
ChannelStateDesc = Ringing
and if 180 Ringing is missing, there is no event
as you may have guessed, its hard to convice "Integrator" to "change"
the code
Dne 01/12/2020 v 13:22 Floimair Florian napsal(a):
> If you have 183 Session progress, there is no need to send 180 Ringing (especially not AFTER 183 Session progress), as you already have early media instead. Having both is actually a bit misleading IMHO.
>
> So this is actually correct. One should not rely on any of these 1xx "Provisional" messages.
> They may or may not be sent, without violating SIP standards.
>
> Am 01.12.20, 12:20 schrieb "asterisk-users im Auftrag von marek" <asterisk-users-bounces at lists.digium.com im Auftrag von cervajs64 at gmail.com>:
>
>
> hi,
>
> after upgrade from Asterisk 11 to Asterisk 13.38.0(chan_sip) (i know,
> its old. customer is very conservative...)
>
> i have problem with missing 180 Ringing
>
> flow is easy (PBX -> Asterisk -> SIP SBC)
>
> Asterisk 11
> PBX - Asterisk
> -> INVITE
> <- 100 Trying
> <- 183 Session Progress
> ( <- RTP -> )
> <- 180 Ringing
> <- 200 OK
>
> Asterisk 13
> -> INVITE
> <- 100 Trying
> <- 183 Session Progress
> ( <- RTP -> )
>
> __MISSING RINGING___
>
> <- 200 OK
>
> temporarily i solved problem with using "R" param
>
> R: Default: Indicate ringing to the calling party, even if the called party
> isn't actually ringing. Allow interruption of the ringback if early
> media
> is received on the channel.
>
> it changed to
>
> Asterisk 13 (Dial(${ARG1},300,R)
> -> INVITE
> <- 100 Trying
> <- 180 Ringing
> <- 183 Session Progress
> ( <- RTP -> )
> <- 200 OK
>
> any ideas why Ringing is missing? any solutions?
>
> Marek
>
>
>
More information about the asterisk-users
mailing list