[asterisk-users] Digium G100

[Nick Olsen]

You might confirm you're getting CallerID from the PRI in the call setup. You can do a debug capture session on the G100 and get this info.

If you need CallerID preserved from the PRI (Like the served PBX sends multiple calling numbers based on end user station) then you'll likely need to fix it on whatever the G100 is serving with said PRI.

If it's all one number anyways, You can just blanket overwrite it from the G100 dialplan (I think it was in outbound routes). Or ultimately, In the asterisk instance during receive before shooting it upstream.

Nick Olsen
Network Engineer
Office: 321-408-5000
Mobile: 321-794-0763

----------------------------------------
From: Jeff LaCoursiere <jeff at stratustalk.com>
Sent: 2/15/19 1:12 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>
Subject: [asterisk-users] Digium G100
Hi,

We recently dumped a Xorcom box that was no end of trouble and replaced
with a Digium G100.  PRI came right up, and we have been using it fairly
flawlessly for several months now, with one caveat.  Calls that arrive
from the PRI are sent to the asterisk instance (13.23.1, chan_sip), then
routed by the dialplan to various other gateways or upstream providers. 
When the call finally lands on a phone somewhere, the caller ID
information has become corrupted, though in a predictable way.

The CID number is replaced with the SIP trunk name of our G100 gateway.

The CID name is replaced by the callers phone number.

This is problematic for a number of reasons - we have lost the caller ID
name, if provided, completely.  There is a lot of confusion from our
customers asking "what does riisegw mean?!", and if they try to return a
missed phone call or recall something from their history, their phones
(Yealink models almost exclusively) try to dial to "riisegw" since that
was actually in the number field.

I haven't tried to dig into this on our asterisk instance yet, was
hoping this is something silly someone could direct us to, or perhaps
someone from Digium can pitch in.  I suppose I should have some kind of
support with the G100... have never tried to actually call Digium before.

Cheers,

Jeff LaCoursiere

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20190215/7aec565c/attachment.html>