[asterisk-users] Freepbx / Asterisk PJsip multipe devices

[Floimair Florian]

Or just do it right using the PJSIP_DIALPLAN_CONTACTS function:

Dial(${PJSIP_DIAL_CONTACTS(${EXTEN})})

 
 
With best regards

Florian Floimair
Innovation - Software-Development

COMMEND INTERNATIONAL GMBH
A-5020 Salzburg, Saalachstraße 51
http://www.commend.com <http://www.commend.com/>

Security and Communication by Commend

FN 178618z | LG Salzburg

Am 06.02.19, 15:26 schrieb "asterisk-users im Auftrag von Mitch Claborn" <asterisk-users-bounces at lists.digium.com im Auftrag von mitch_ml at claborn.net>:

    You can do this in the dial plan. Register the devices separately and 
    include both addresses in the Dial() command.
    
    
    Mitch
    
    On 2/6/19 8:16 AM, basti wrote:
    > In other words.
    > 
    > I there a way that both phones are ring with only one extension?
    > 
    > On 06.02.19 15:05, basti wrote:
    >> both phones are in the same net.
    >> when the soft phone is shut down, on hardware phone only an led is
    >> flashing to show an incoming call but no sound.
    >>
    >> both phones use the same extension. that is the reason why I use pjsip.
    >>
    >> On 06.02.19 14:59, Antony Stone wrote:
    >>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote:
    >>>
    >>>> These two phones are not using the same extension, are they?
    >>>
    >>> If you shut down the softphone, does the hardware phone then ring?
    >>>
    >>>
    >>> Antony.
    >>>
    >>>> On 2/6/2019 8:49 AM, basti wrote:
    >>>>> both phones are registered. and the hardware phone can also make calls.
    >>>>> but an incoming call is not displayed and also not hearing.
    >>>>>
    >>>>> Call Waiting is also disabled.
    >>>>>
    >>>>> On 06.02.19 14:07, Cyril Alberts wrote:
    >>>>>> Hi,
    >>>>>> look at your registrations, is the hardware phone registered?
    >>>>>> if yes, which phone vendor do you want to connect? can you make
    >>>>>> outgoing calls with hardwarephone?
    >>>>>>
    >>>>>> BR Cyril
    >>>>>>
    >>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti:
    >>>>>>> Hello,
    >>>>>>>
    >>>>>>> I have some user that had have a hardwarephone and an softphone. I
    >>>>>>> use pjsip driver and set "Max Contacts = 2" to have register both at the
    >>>>>>> same time.
    >>>>>>>
    >>>>>>> But Only the softphone is ring. the hardware phone is mute.
    >>>>>>>
    >>>>>>> How can i fix this?
    >>>
    >>
    > 
    
    -- 
    _____________________________________________________________________
    -- Bandwidth and Colocation Provided by http://www.api-digital.com --
    
    Check out the new Asterisk community forum at: https://community.asterisk.org/
    
    New to Asterisk? Start here:
          https://wiki.asterisk.org/wiki/display/AST/Getting+Started
    
    asterisk-users mailing list
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-users