[asterisk-users] Freepbx / Asterisk PJsip multipe devices

[basti]

that was my first idea.

and how should an other user know which number he should dial?

user a: soft phone extension 100
	hardware phone extension 101


On 06.02.19 15:25, Mitch Claborn wrote:
> You can do this in the dial plan. Register the devices separately and
> include both addresses in the Dial() command.
> 
> 
> Mitch
> 
> On 2/6/19 8:16 AM, basti wrote:
>> In other words.
>>
>> I there a way that both phones are ring with only one extension?
>>
>> On 06.02.19 15:05, basti wrote:
>>> both phones are in the same net.
>>> when the soft phone is shut down, on hardware phone only an led is
>>> flashing to show an incoming call but no sound.
>>>
>>> both phones use the same extension. that is the reason why I use pjsip.
>>>
>>> On 06.02.19 14:59, Antony Stone wrote:
>>>> On Wednesday 06 February 2019 at 13:54:44, Mark Wiater wrote:
>>>>
>>>>> These two phones are not using the same extension, are they?
>>>>
>>>> If you shut down the softphone, does the hardware phone then ring?
>>>>
>>>>
>>>> Antony.
>>>>
>>>>> On 2/6/2019 8:49 AM, basti wrote:
>>>>>> both phones are registered. and the hardware phone can also make
>>>>>> calls.
>>>>>> but an incoming call is not displayed and also not hearing.
>>>>>>
>>>>>> Call Waiting is also disabled.
>>>>>>
>>>>>> On 06.02.19 14:07, Cyril Alberts wrote:
>>>>>>> Hi,
>>>>>>> look at your registrations, is the hardware phone registered?
>>>>>>> if yes, which phone vendor do you want to connect? can you make
>>>>>>> outgoing calls with hardwarephone?
>>>>>>>
>>>>>>> BR Cyril
>>>>>>>
>>>>>>> Am Mittwoch, den 06.02.2019, 13:00 +0100 schrieb basti:
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> I have some user that had have a hardwarephone and an softphone. I
>>>>>>>> use pjsip driver and set "Max Contacts = 2" to have register
>>>>>>>> both at the
>>>>>>>> same time.
>>>>>>>>
>>>>>>>> But Only the softphone is ring. the hardware phone is mute.
>>>>>>>>
>>>>>>>> How can i fix this?
>>>>
>>>
>>
>