[asterisk-users] Send QueueMemberAdded Event via AMI

[Joshua C. Colp]

On Mon, Nov 26, 2018, at 12:30 PM, Systemmanagement wrote:
> Hello everybody,
> 
> we are using asterisk 16 with a realtime config and have a problem with 
> FOP2. We have developed a webinterface for managing the queues. If we 
> add a member to a queue, everything works fine but the user is not shown 
> in the queue in FOP2 Panel. The problem is that the FOP2 Panel does not 
> receive the QueueMemberAdded Event. This will only be sent if the 
> QueueAdd Function is used (QueueMemberAdded>Raised when a member is 
> added to the queue).
> 
> My idea is to send the event with the help of a script via AMI. First i 
> tried to do this manually connected to the AMI via telnet and pasted it in:
> 
> Event: QueueMemberAdded
> Privilege: agent,all
> Queue: 905
> MemberName: SIP/599
> Interface: SIP/599
> StateInterface: SIP/599
> Membership: realtime
> Penalty: 0
> CallsTaken: 0
> LastCall: 0
> LastPause: 0
> InCall: 0
> Status: 1
> Paused: 0
> PausedReason: 0
> Ringinuse: 0
> 
> This generates an error:
> Response: Error
> Message: Missing action in request
> 
> I wasn´t able to find the correct action for sending events. Should this 
> action listed in "actions:commands"? How can i sent the 
> "QueueMemberAdded" Event? and what is the correct format?

AMI does not allow you to send events like this. They can only be generated and sent by the C code in Asterisk itself.

-- 
Joshua C. Colp
Digium - A Sangoma Company | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org