[asterisk-users] pri_check_event returned error 22 (Invalid argument)

[陈杨文]

Why I keep get error pri_check_event returned error 22 (Invalid argument),
after

pri debug 15 span 1

PRI Span: 1 < TEI: 0 State 7(Multi-frame established)
PRI Span: 1 < V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=8192
PRI Span: 1 < [ 02 01 01 01 ]
PRI Span: 1 < Supervisory frame:
PRI Span: 1 < SAPI: 00 C/R: 1 EA: 0
PRI Span: 1 < TEI: 000 EA: 1
PRI Span: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 1 < N(R): 000 P/F: 1
PRI Span: 1 < 0 bytes of data
PRI Span: 1
PRI Span: 1 > TEI: 0 State 7(Multi-frame established)
PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 > T200_id=0, N200=3, T203_id=8192
PRI Span: 1 > [ 02 01 01 01 ]
PRI Span: 1 > Supervisory frame:
PRI Span: 1 > SAPI: 00 C/R: 1 EA: 0
PRI Span: 1 > TEI: 000 EA: 1
PRI Span: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 1 > N(R): 000 P/F: 1
PRI Span: 1 > 0 bytes of data
PRI Span: 1 -- Got ACK for N(S)=0 to (but not including) N(S)=0
PRI Span: 1 -- T200 requested to stop when not started
PRI Span: 1 T203 requested to start without stopping first
PRI Span: 1 -- Starting T203 timer
PRI Span: 1 Done handling message for SAPI/TEI=0/0
pri_check_event returned error 22 (Invalid argument)
PRI Span: 1
PRI Span: 1 < TEI: 0 State 8(Timer recovery)
PRI Span: 1 < V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=8192, N200=3, T203_id=0
PRI Span: 1 < [ 00 01 01 01 ]
PRI Span: 1 < Supervisory frame:
PRI Span: 1 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 1 < TEI: 000 EA: 1
PRI Span: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 1 < N(R): 000 P/F: 1
PRI Span: 1 < 0 bytes of data
PRI Span: 1 -- Got ACK for N(S)=0 to (but not including) N(S)=0
PRI Span: 1 -- Stopping T200 timer
PRI Span: 1 -- Starting T203 timer
PRI Span: 1 Done handling message for SAPI/TEI=0/0
pri_check_event returned error 22 (Invalid argument)
PRI Span: 1
PRI Span: 1 < TEI: 0 State 7(Multi-frame established)
PRI Span: 1 < V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=0, N200=3, T203_id=8192
PRI Span: 1 < [ 02 01 01 01 ]
PRI Span: 1 < Supervisory frame:
PRI Span: 1 < SAPI: 00 C/R: 1 EA: 0
PRI Span: 1 < TEI: 000 EA: 1
PRI Span: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 1 < N(R): 000 P/F: 1
PRI Span: 1 < 0 bytes of data
PRI Span: 1
PRI Span: 1 > TEI: 0 State 7(Multi-frame established)
PRI Span: 1 > V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 > K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 > T200_id=0, N200=3, T203_id=8192
PRI Span: 1 > [ 02 01 01 01 ]
PRI Span: 1 > Supervisory frame:
PRI Span: 1 > SAPI: 00 C/R: 1 EA: 0
PRI Span: 1 > TEI: 000 EA: 1
PRI Span: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 1 > N(R): 000 P/F: 1
PRI Span: 1 > 0 bytes of data
PRI Span: 1 -- Got ACK for N(S)=0 to (but not including) N(S)=0
PRI Span: 1 -- T200 requested to stop when not started
PRI Span: 1 T203 requested to start without stopping first
PRI Span: 1 -- Starting T203 timer
PRI Span: 1 Done handling message for SAPI/TEI=0/0
pri_check_event returned error 22 (Invalid argument)
PRI Span: 1
PRI Span: 1 < TEI: 0 State 8(Timer recovery)
PRI Span: 1 < V(A)=0, V(S)=0, V(R)=0
PRI Span: 1 < K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
PRI Span: 1 < T200_id=8192, N200=3, T203_id=0
PRI Span: 1 < [ 00 01 01 01 ]
PRI Span: 1 < Supervisory frame:
PRI Span: 1 < SAPI: 00 C/R: 0 EA: 0
PRI Span: 1 < TEI: 000 EA: 1
PRI Span: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
PRI Span: 1 < N(R): 000 P/F: 1
PRI Span: 1 < 0 bytes of data
PRI Span: 1 -- Got ACK for N(S)=0 to (but not including) N(S)=0
PRI Span: 1 -- Stopping T200 timer
PRI Span: 1 -- Starting T203 timer
PRI Span: 1 Done handling message for SAPI/TEI=0/0
pri_check_event returned error 22 (Invalid argument)

What's wrong ?

$ asterisk -rx 'core show version'
Asterisk 15.3.0 built by buildozer @ build-3-8-x86_64 on a x86_64 running
Linux on 2018-05-16 08:11:26 UTC

$ asterisk -rx 'pri show version'
libpri version: 1.6.0

$ dahdi_hardware
pci:0000:02:00.0     wct4xxp+     d161:1220 Wildcard TE220 (5th Gen)

$ dahdi_scan
[1]
active=yes
alarms=OK
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE220 (5th Gen)
location=Board ID Switch 0
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
[2]
active=yes
alarms=RED/LFA
description=T2XXP (PCI) Card 0 Span 2
name=TE2/0/2
manufacturer=Digium
devicetype=Wildcard TE220 (5th Gen)
location=Board ID Switch 0
basechan=32
totchans=31
irq=0
type=digital-E1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS

Host is alpinelinux 3.8.

The card vendor is openvox
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20180702/7c472d6a/attachment.html>