[asterisk-users] Asterisk 13.X with multiple IP addresses: Can I force a given chan_sip peer to a given IP address ?

[Dovid Bender]

Oliver,

Not per peer. What you can do is if you have a few spare IP's is set up
OpenSiPS and bounce the calls that way. The call will be Carrier ->
OpenSipS -> Asterisk. Asterisk will see the IP of OpenSipS and you can
decide there what to do with the call.



On Wed, Sep 6, 2017 at 5:39 AM, Olivier <oza.4h07 at gmail.com> wrote:

> Hello,
>
> I'm quite sure this question has already be asked previously but before
> diving into it with a lab setup, I would like to re-ask here the thereafter
> question.
>
> I've got a bunch of very old Asterisk boxes (lastest Asterisk version is
> 1.6.1.X), all belonging to the same network, I would like to centralize on
> a single Asterisk instance on a brand new box.
> This instance will be powered with lastest available LTS Asterisk
> (Asterisk 13.X, currently).
>
> I know this is possible with PJSIP transport setting but with chan_sip, is
> it possible to specify that to communicate with a given SIP peer, a
> specific IP address (and only this one) is used ?
>
> Best regards
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at: https://community.asterisk.
> org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20170906/96f33c0f/attachment.html>