[asterisk-users] asterisk server - no sound

[Marcelo Terres]

I think you need to configure the IPs in your server. You just have localhost...
Marcelo H. Terres <mhterres at gmail.com>
IM: mhterres at jabber.mundoopensource.com.br
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres


On 6 June 2017 at 16:27, andre castro <andre at andrecastro.info> wrote:
> Thanks Anthony.
>
> I did it on the server, according to
> https://www.voip-info.org/wiki/view/port+forwarding
>
> However after doing it, when running Asterisk I get the following message
> sudo asterisk -vvvvvvr
> No ethernet interface found for seeding global EID. You will have to set
> it manually.
> Unable to access the running directory (No such file or directory).
> Changing to '/' for compatibility.
>
> How and where can it be set?
>
> My server ifconfig:
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>           RX packets:113895058 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:113895058 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:36041459269 (33.5 GiB)  TX bytes:36041459269 (33.5 GiB)
>
> venet0    Link encap:UNSPEC  HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>           inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0
> Mask:255.255.255.255
>           inet6 addr: ::2/128 Scope:Compat
>           inet6 addr: 2a01:488:66:1000:5c33:846e:0:1/128 Scope:Global
>           UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
>           RX packets:158483849 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:272193853 errors:0 dropped:230 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:61233254724 (57.0 GiB)  TX bytes:106403959440 (99.0 GiB)
>
> venet0:0  Link encap:UNSPEC  HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>           inet addr:server.ip.add.r  P-t-P:server.ip.add.r
> Bcast:server.ip.add.r  Mask:255.255.255.255
>           UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
>
>
>
> On 06/06/2017 05:09 PM, Antony Stone wrote:
>> On Tuesday 06 June 2017 16:57:07 andre castro wrote:
>>
>>> On 06/06/2017 04:36 PM, Antony Stone wrote:
>>>>
>>>> Tell us about your networking arrangement - are both phones and the
>>>> Asterisk machine on the same network?
>>>
>>> Nop. They are in 2 different networks. The phones in one and the
>>> Asterisk machine in another.
>>
>> Okay, that is why you have audio between the two phones, then - they can see
>> each other directly, on the same network, and nothing is interfering with the
>> traffic between them.
>>
>>>> Is there a router in between any of them?
>>>
>>> Yes. In the phones network.
>>>
>>>> Is there any NAT involved?
>>>
>>> Yes in the phones' network. They both have different private IP address
>>> and one public IP.
>>
>> Okay, I suspect that this NATting router is not passing the UDP packets from
>> the server back to the phones correctly, based on the SIP connection (when the
>> phone makes the call).
>>
>> SIP is on UDP 5060; audio is on UDP 10,000 - 20,000.
>>
>> If it's a Linux router, you need to make sure you are allowing FORWARDed traffic
>> which matches ESTABLISHED, RELATED.
>>
>> If it's not a Linux router, you need to find out how to get it to support SIP
>> and RTSP.
>>
>>
>> Good luck,
>>
>>
>> Antony.
>>
>
> --
> oooooooooo.io
> bibliotecha.info
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at: https://community.asterisk.org/
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users