[asterisk-users] IAX port 4569

[thelma at sys-concept.com]

Yes, it is working!

tcpdump -ni any port 4569
dropped privs to tcpdump
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes
14:20:42.184521 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 53
14:20:42.184921 IP 10.0.0.100.4569 > 10.0.0.108.4569: UDP, length 37
14:20:42.190529 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 83
14:20:42.190639 IP 10.0.0.100.4569 > 10.0.0.108.4569: UDP, length 71
14:20:42.191378 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 12
14:20:45.320191 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 31
14:20:45.338718 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 65
14:20:45.338875 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 82
14:20:45.357173 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 40
14:20:45.357331 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 65
14:20:45.376559 IP 192.168.141.1.4569 > 192.168.141.7.4569: UDP, length 53
14:20:45.376630 IP 192.168.141.7.4569 > 192.168.141.1.4569: UDP, length 12
^C
12 packets captured
12 packets received by filter
0 packets dropped by kernel


Thelma
On 06/05/2017 02:17 PM, Marcelo Terres wrote:
> You can use tcpdump in your server to verify if it is receiving the
> packets.
> 
> tcpdump -ni any port 4569
> 
> So you have more than one ip in the server?
> 
> On 5 Jun 2017 9:13 pm, <thelma at sys-concept.com> wrote:
> 
>> No, I don't think it is IP table issue, I've not upgraded dd-wrt for a
>> while and it was zoiper was working OK with my previous version of
>> asterisk.
>>
>> After upgrade to 11.25.1 it stop working.
>> I'm sure port forwarding on dd-wrt is working OK as I have port 80 and
>> 443 open.
>>
>>
>> Thelma
>> On 06/05/2017 07:12 AM, Christopher van de Sande wrote:
>>> Another might be to make sure iptables isn't blocking the connection.
>>>
>>> You can run
>>> iptables -L -n -v
>>> To see if its set to block any ports.
>>>
>>>
>>> On June 5, 2017 9:06:55 AM EDT, thelma at sys-concept.com wrote:
>>>> I'm getting:
>>>> netstat -a |grep 4569
>>>> udp        0      0 0.0.0.0:4569            0.0.0.0:*
>>>>
>>>> Should I be getting localhost IP?
>>>>
>>>> Thelma
>>>>
>>>> On 06/05/2017 06:48 AM, thelma at sys-concept.com wrote:
>>>>> Does asterisk listen on port 4569 by default?
>>>>>
>>>>> I'm running version Asterisk 11.25.1 and have a problem registering
>>>>> Zoiper (IAX) to Asterisk.
>>>>> I'm getting an error:
>>>>> Registration refused
>>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> Check out the new Asterisk community forum at:
>>>> https://community.asterisk.org/
>>>>
>>>> New to Asterisk? Start here:
>>>>      https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Check out the new Asterisk community forum at: https://community.asterisk.
>> org/
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> 
> 
>