[asterisk-users] PJSIP status check at DB level

[Ahmed Munir]

Thanks.

But I was not able to find the records in 'ps_contacts' table. As per my
'ps_aors' entries, I'm enabling and using only following fields below;

id: 20010 <extension/endpoint>
max_contacts: 1
remove_existing: yes
qualify_frequecy: 10

Please advise if there any more parameters I may need to set in 'ps_aors'
table.


Date: Tue, 10 Jan 2017 10:18:50 -0400
> From: Joshua Colp <jcolp at digium.com>
> To: asterisk-users at lists.digium.com
> Subject: Re: [asterisk-users] PJSIP status check at DB level
>         (Realtime)
> Message-ID:
>         <1484057930.4162258.843096561.6368D269 at webmail.messagingengine.com
> >
> Content-Type: text/plain; charset="utf-8"
>
> On Tue, Jan 10, 2017, at 10:11 AM, Ahmed Munir wrote:
> > Hi,
> >
> > I would like to know how to check PJSIP status for endpoints at DB level
> > (realtime) just like in chan_sip? Like on chan_sip when sip extension
> > gets
> > register regseconds, ipaddr, fullcontact & many more parameters get
> > updated
> > at DB level.
> >
> > The version of asterisk I'm using is 13.8 cert 4
>
> Registered devices are added as contacts to the "ps_contacts" table.
> This is because there can be multiple of them. You would need to look in
> that table and make the association (based on AOR).
>
> --
> Joshua Colp
> Digium, Inc. | Senior Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com & www.asterisk.org
>
>


-- 
Regards,

Ahmed Munir Chohan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20170111/a7daf728/attachment.html>