[asterisk-users] IAX2 getting stuck

[Antony Stone]

On Wednesday 19 April 2017 at 23:35:24, Carlos Chavez wrote:

> On 4/19/17 4:23 PM, Antony Stone wrote:
> >
> > You say the USB ethernet adapter got unplugged and then reconnected...
> > 
> > 1. What's the name of the network device for this adapter?  Is it the
> > same name as it previously had?
> > 
> > 2. What does 'ifconfig' say the IP address is for this adapter?
> > 
> > 3. What do you have in /etc/asterisk/iax.conf for 'bindaddr' and
> > 'bindport'?
> > 
> > 4. Do you have SIP connections on the same network interface, and are
> > those working as normal?
> > 
> > 
> > Antony.
> 
> 1- No changes to device names.  eth0 is the main link to the network,
> eth1 (also internal) goes to a SIP provider and eth2 (the USB adapter)
> goes to another SIP provider.  All IAX trunks use eth0
> 
> 2- ifconfig gives the proper IP and netmask for all interfaces
> 
> 3- We do not specify bindaddr or bindport in the config file as the
> default is to bind to 0.0.0.0
> 
> 4- We had to make new SIP trunks to replace the IAX2 trunks to all
> servers.  The SIP trunk is working with no problems.  Except for two SIP
> links to PSTN all internal extensions use the same network interface.

Ugh :(

Sorry, I have no more ideas, then.

I hope someone else comes into this thread with a helpful suggestion.


Antony.

-- 
The first fifty percent of an engineering project takes ninety percent of the 
time, and the remaining fifty percent takes another ninety percent of the time.

                                                   Please reply to the list;
                                                         please *don't* CC me.