[asterisk-users] Asterisk PJSIP Multi-tenant
Annus Fictus
annusfictus at gmail.com
Mon May 16 15:56:30 CDT 2016
Done.
ASTERISK-26026
El 16/05/2016 a las 14:40, George Joseph escribió:
>
>
> On Sun, May 15, 2016 at 10:17 PM, Annus Fictus <annusfictus at gmail.com
> <mailto:annusfictus at gmail.com>> wrote:
>
> Hello,
>
> with qualify_frequency=0 I can't receive calls from others endpoints.
>
> Other strange think is if I set mailboxes parameter on the
> console, when the endpoint registering, i can see:
>
> ERROR[2208]: res_pjsip.c:2946 create_out_of_dialog_request: Unable
> to create outbound NOTIFY request to endpoint 1001 at sip.domain.com
> <mailto:1001 at sip.domain.com>
> WARNING[2208]: res_pjsip_mwi.c:379
> send_unsolicited_mwi_notify_to_contact: Unable to create
> unsolicited NOTIFY request to endpoint 1001 at sip.domain.com
> <mailto:1001 at sip.domain.com> URI
> sip:1001 at 95.250.29.3:50673;rinstance=1af959e7c0059fc4
>
> Unsolicited NOTIFY and OPTIONS both use the out-of-dialog path so I'm
> guessing we have an issue there. Open an issue at
> https://issues.asterisk.org
>
>
>
> Regards
>
> El 16/05/2016 a las 02:52, George Joseph escribió:
>>
>>
>> On Sun, May 15, 2016 at 12:00 PM, Annus Fictus
>> <annusfictus at gmail.com <mailto:annusfictus at gmail.com>> wrote:
>>
>> Hello List,
>>
>> following this thread:
>>
>> http://asterisk-users.digium.narkive.com/ulR5hd1M/same-pjsip-username-with-differents-domains
>>
>> I tried to configure on the pjsip.conf the same endpoint with
>> different domains like:
>>
>> [1000 at sip.domain.com <mailto:1000 at sip.domain.com>]
>> type=endpoint
>>
>> [1000 at sip1.domain.com <mailto:1000 at sip1.domain.com>]
>> type=endpoint
>>
>> I can register the two 1000 endpoints using different domain
>> but on the Asterisk console:
>>
>> ERROR[1748]: res_pjsip.c:2946 create_out_of_dialog_request:
>> Unable to create outbound OPTIONS request to endpoint
>> 1000 at sip.domain.com <mailto:1000 at sip.domain.com>
>>
>> ERROR[1748]: res_pjsip/pjsip_options.c:350 qualify_contact:
>> Unable to create request to qualify contact
>> sip:1000 at 95.250.29.3:53570
>> <http://sip:1000@95.250.29.3:53570>;rinstance=d90827763e4353c0
>>
>> in the aor section I'm using:
>>
>> qualify_frequency=30
>>
>>
>> If you set qualify_frequency=0, can that endpoint make and
>> receive calls? Not suggesting this as a solution, just asking to
>> narrow possibilities down.
>>
>>
>> Any hint?
>>
>> Regards
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by
>> http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar
>> every Thurs:
>> http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>>
>> --
>> George Joseph
>> Digium, Inc. | Software Developer
>> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
>> Check us out at: www.digium.com <http://www.digium.com> &
>> www.asterisk.org <http://www.asterisk.org>
>>
>>
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> George Joseph
> Digium, Inc. | Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com <http://www.digium.com/> &
> www.asterisk.org <http://www.asterisk.org/>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160516/ea0e0a56/attachment.html>
More information about the asterisk-users
mailing list