[asterisk-users] TDM804 card

[Jerry Geis]

I am trying to do an install of asterisk by source...
dahdi 2.11.1, asterisk 11.22.0 libpri-1.5.0 on CentOS 6.7
(not my first time doing so, but this is a remote system someone else setup)

All installed well, compiled fine but when I run asterisk
it is not recognizing the card.

output log gives me:
dahdi_open: Unable to specify channel 1: No such device or address

lsmod | grep dahdi shows
dahdi_voicebus         53074  1 wctdm24xxp
dahdi                 224394  2 wctdm24xxp,dahdi_voicebus
crc_ccitt               1717  2 wctdm24xxp,dahdi

which looks correct.

 dahdi_hardware -v
pci:0000:04:00.0     wctdm24xxp+  d161:0800 Wildcard TDM800P

dahdi_scan
[1]
active=yes
alarms=OK
description=Wildcard TDM800P
name=WCTDM/0
manufacturer=Digium
devicetype=Wildcard TDM800P
location=PCI Bus 04 Slot 01
basechan=1
totchans=8
irq=0
type=analog
port=1,FXO
port=2,FXO
port=3,FXO
port=4,FXO
port=5,none
port=6,none
port=7,none
port=8,none


So I think dahdi looks good...

I have asterisk configured with
more /etc/asterisk/chan_dahdi.conf
[channels]


pridialplan=unknown
prilocaldialplan=unknown


signalling=fxs_ks
relaxdtmf=yes
context=smvoice-incoming
group=1
channel => 1-8

All these packages are installed: yum install -y make
wget openssl-devel ncurses-devel newt-devel libxml2-devel kernel-devel gcc
gcc-c++ sqlite-devel libuuid-devel

What next step(s) do I need to get asterisk happy?
Thanks,

jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160503/a5ba5c27/attachment.html>