[asterisk-users] Mixing PJSIP realtime and flat files

[David Cunningham]

Shame, but thank you very much for the reply Joshua.


On 22 January 2016 at 10:26, Joshua Colp <jcolp at digium.com> wrote:

> David Cunningham wrote:
>
>> Hello,
>>
>> Is it possible to mix PJSIP realtime and flat file configuration in
>> pjsip,conf?
>>
>> What we want is to set up endpoints in the ps_endpoints table with some
>> columns set but most being NULL, and then allow end-customers to
>> optionally add configuration by adding a pjsip.conf section.
>>
>> For example, in ps_endpoinds might be an endpoint with id "asterisk-1"
>> with the transport, aors, auth, and context columns set but all other
>> fields NULL. Then the end-customer could add a [asterisk-1] section in
>> pjsip.conf which sets the codecs they want to enable.
>>
>> We tried this but it seemed that the [asterisk-1] section in pjsip.conf
>> had no effect. Our sorcery.conf is attached.
>>
>> Is this possible, and how do we do it? Thanks very much for any advice.
>>
>
> It's not possible to do this. Each source (realtime, config file) provides
> the complete definition.
>
> --
> Joshua Colp
> Digium, Inc. | Senior Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com & www.asterisk.org
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
David Cunningham, Voisonics
http://voisonics.com/
USA: +1 213 221 1092
UK: +44 (0) 20 3298 1642
Australia: +61 (0) 2 8063 9019
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160122/a4ebd70c/attachment.html>