[asterisk-users] Asterisk 11 and old Thomson 2030S Hardphone => SIP Register/Auth Problem against V11

[Juergen Sauer]

Am 07.01.2016 um 10:55 schrieb Frank:
> On Wed, 2016-01-06 at 17:03 +0100, Juergen Sauer wrote:
Thx, 4answer. :)

>> with in my sip.conf, I have got for this hardphone:
>> [...]
>> [hard1]
>>         username=hard1
>>         secret=correct-and-three-times-checked-4-digit-pin
> 
> In most cases, there is no need to set the "username=" option. The name
> of the device is the name within the square brackets above the
> configuration section.
> Delete the "username=hard1" and reload sip.conf.

Should be so, agreed. But it worked quite a long time not this way.
:(

Got now up. Why? I do not know. This Hard phone is really needing an
full expert".

Now this piece of antique hardware it does recognize calls, which
asterisk sends.
Calling out, works, asterisk sees the device as "hard1". Calling "hard1"
shows up, "not avaible"... Same Setup on Snom 821 works perfectly.


mit freundlichen Grüßen
Jürgen Sauer
-- 
Jürgen Sauer - automatiX GmbH,
+49-4209-4699, juergen.sauer at automatix.de
Geschäftsführer: Jürgen Sauer,
Gerichtstand: Amtsgericht Walsrode • HRB 120986
Ust-Id: DE191468481 • St.Nr.: 36/211/08000
GPG Public Key zur Signaturprüfung:
http://www.automatix.de/juergen_sauer_publickey.gpg