[asterisk-users] Cisco IP 8841 asterisk integration

[Steve Davies]

If you need to know what the provisioning XML should look like for a 3PCC
build of a Cisco 78xx or 88xx phone, then let it boot without provisioning,
and then log in to its web interface. Select admin mode and log-in if
necessary. Then edit the URL in the browser from:

http://ip-address/admin/
to
http://ip-address/admin/cfg.xml

To see the handset's current configuration.

Note that these phones are VERY fussy about being sent clean, compliant XML
for provisioning.

Hope that helps,
Steve

On Tue, 13 Dec 2016 at 12:37 Gopalakrishnan N <gopalakrishnan.an at gmail.com>
wrote:

> Thank you for the information. Actually the phone came with sip firmware.
> I tried with TFTP with SEPMAC.CNF.XML and other relevant xml files. But the
> phone stuck with blank screen while bootup.
>
> And Cisco TAC support says, the phones part number is with enterprise
> firmware and it can't work with Asterisk.
>
> Regards.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20161213/5bba7946/attachment.html>