[asterisk-users] problems with PJSIP install on UBUNTU 14.04

Ryan, Travis RyanT at OscarWinski.com
Wed Sep 23 09:09:01 CDT 2015


Ok so now I'm getting this when doing a make in asterisk...

travis at pcimphone1:~/downloads/asterisk-13.5.0$ make
   [LD] chan_pjsip.o pjsip/dialplan_functions.o -> chan_pjsip.so
/usr/bin/ld: /usr/local/lib/libpjsip-ua-x86_64-unknown-linux-gnu.a(sip_inv.o): relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
/usr/local/lib/libpjsip-ua-x86_64-unknown-linux-gnu.a: error adding symbols: Bad value
collect2: error: ld returned 1 exit status
make[1]: *** [chan_pjsip.so] Error 1
make: *** [channels] Error 2

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Ryan, Travis
> Sent: Wednesday, September 23, 2015 10:01 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: Re: [asterisk-users] problems with PJSIP install on UBUNTU
> 14.04
> 
> 
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> > bounces at lists.digium.com] On Behalf Of Ryan, Travis
> > Sent: Wednesday, September 23, 2015 9:55 AM
> > To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> > Subject: Re: [asterisk-users] problems with PJSIP install on UBUNTU
> > 14.04
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: asterisk-users-bounces at lists.digium.com
> > > [mailto:asterisk-users- bounces at lists.digium.com] On Behalf Of
> > > Joshua Colp
> > > Sent: Wednesday, September 23, 2015 9:39 AM
> > > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > > Subject: Re: [asterisk-users] problems with PJSIP install on UBUNTU
> > > 14.04
> > >
> > > Ryan, Travis wrote:
> > > > I've built PJSIP a few months ago on a server that was 12.04 and
> > > can't
> > > > remember how I got past this same issue. I've looked at the links
> > > I'll
> > > > put below and the comments section where others had the issue,
> but
> > > > those tips aren't helping either.
> > > >
> > > > Basically everything seems to compile and install correctly, but
> > > > then the "ldconfig -p | grep pj" doesn't show anything. So
> > > > ldconfig when ran by itself isn't picking up on the install of
> > > > pjsip. Also when going into the process of menuselect it shows
> > > > that it's not available
> > > as a resource.
> > >
> > > Do you have the pkg-config package installed? That is what the
> build
> > > system uses for finding the right stuff.
> > >
> > > Also what does the following show:
> > >
> > > ls /usr/lib/libpj*.so
> > > ls /usr/local/lib/libpj*.so
> > >
> > > And what did you pass to the configure script for pjproject?
> > >
> > [Ryan, Travis]
> > travis at pcimphone1:~$ ls /usr/lib/libpj*.so
> > ls: cannot access /usr/lib/libpj*.so: No such file or directory
> > travis at pcimphone1:~$ ls /usr/local/lib/libpj*.so
> > ls: cannot access /usr/local/lib/libpj*.so: No such file or directory
> > travis at pcimphone1:~$ ls /usr/lib/libpj*.so
> > lib/   lib64/
> > travis at pcimphone1:~$ ls /usr/lib64/libpj*.so
> > /usr/lib64/libpjlib-util.so        /usr/lib64/libpjmedia-codec.so
> > /usr/lib64/libpjmedia-videodev.so  /usr/lib64/libpjsip-simple.so
> > /usr/lib64/libpjsip-ua.so  /usr/lib64/libpjsua2.so
> > /usr/lib64/libpjmedia-audiodev.so  /usr/lib64/libpjmedia.so
> > /usr/lib64/libpjnath.so            /usr/lib64/libpjsip.so
> > /usr/lib64/libpj.so        /usr/lib64/libpjsua.so
> >
> >
> > As you can see it put them in the lib64 folder. I've done the command
> > and recompiled so many times with the following attempts....
> >
> > ./configure --prefix=/usr --enable-shared --disable-sound --disable-
> > resample --disable-video --disable-opencore-amr CFLAGS='-O2 -DNDEBUG'
> > ./configure
> > ./configure --prefix=/usr
> > ./configure --libdir=/usr/lib64 --prefix=/usr --enable-shared --
> > disable-sound --disable-resample --disable-video
> > --disable-opencore-amr
> >
> >
> Now for some reason they are showing after running the usual .configure
> from the wiki. I swear to God it wasn't working last night. SMH [Ryan,
> Travis]
> 
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list