[asterisk-users] How do I enable instant messaging support for PJSIP endpoints on Asterisk 13.1.0?

[Thyda ENG]

Here is my extension .
[astsms]
exten => _.,1,NoOp(SMS receiving dialplan invoked)
exten => _.,n,NoOp(To ${MESSAGE(to)})
exten => _.,n,NoOp(From ${MESSAGE(from)})
exten => _.,n,NoOp(Body ${MESSAGE(body)})
exten => _.,n,Set(ACTUALTO=${CUT(MESSAGE(to),@,1)})
exten => _.,n,MessageSend(${ACTUALTO},${MESSAGE(from)})
exten => _.,n,NoOp(Send status is ${MESSAGE_SEND_STATUS})
exten => _.,n,GotoIf($["${MESSAGE_SEND_STATUS}" != "SUCCESS"]?sendfailedmsg)
exten => _.,n,Hangup()

exten =>
_.,n(sendfailedmsg),Set(MESSAGE(body)="[${STRFTIME(${EPOCH},,%d%m%Y-%H:%M:%S)}]
Your message to ${EXTEN} has failed. Retry later.")
exten => _.,n,Set(ME_1=${CUT(MESSAGE(from),<,2)})
exten => _.,n,Set(ACTUALFROM=${CUT(ME_1,@,1)})
exten => _.,n,MessageSend(${ACTUALFROM},ServiceCenter)
exten => _.,n,Hangup()
exten => _.,n,Hangup()

On Tue, Nov 17, 2015 at 9:58 AM, Sonny Rajagopalan <
sonny.rajagopalan at gmail.com> wrote:

> Thanks again. How do you create that message context in extensions.conf?
>
> On Mon, Nov 16, 2015 at 9:44 PM, Thyda ENG <engthyda at gmail.com> wrote:
>
>> According to what I have done , I add the message_context to the
>> pjsip.endpoint_custom.conf in /etc/asterisk and then I create that
>> message_context in the extension.conf, and it works.
>>
>> On Tue, Nov 17, 2015 at 9:34 AM, Sonny Rajagopalan <
>> sonny.rajagopalan at gmail.com> wrote:
>>
>>> So, the only thing that is needed in the endpoint definition in
>>> pjsip.conf (there is no such file pjsip.endpoint_custom.conf) is
>>>
>>> *message_context=astsms*
>>>
>>> Is that correct? Anything I need to do in extensions.conf? I see that
>>> the messages are received at Asterisk (when I turn on pjsip set logger on)
>>> but they are not delivered to the other endpoint. What gives?
>>>
>>> Any help appreciated. Thanks!
>>>
>>> On Mon, Nov 16, 2015 at 9:16 PM, Thyda ENG <engthyda at gmail.com> wrote:
>>>
>>>> The default message context for the pjsip is the same the call context,
>>>> so to set the new message context for the pjsqip you need to modify your
>>>> pjsip.endpoint_custom.conf and add the message context as in the example
>>>> below :
>>>>
>>>> [100]
>>>>
>>>> type=endpoint
>>>>
>>>> aors=100
>>>>
>>>> auth=100-auth
>>>>
>>>> allow=ulaw,alaw,gsm,g726
>>>>
>>>> context=from-internal
>>>>
>>>> callerid=device <100>
>>>>
>>>> dtmf_mode=rfc4733
>>>>
>>>> use_avpf=no
>>>>
>>>> ice_support=no
>>>>
>>>> media_use_received_transport=no
>>>>
>>>> trust_id_inbound=yes
>>>>
>>>> media_encryption=no
>>>>
>>>> rtp_symmetric=yes
>>>>
>>>> rewrite_contact=yes
>>>>
>>>> *message_context=astsms*
>>>>
>>>>
>>>>
>>>> On Tue, Nov 17, 2015 at 8:35 AM, Sonny Rajagopalan <
>>>> sonny.rajagopalan at gmail.com> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> I am looking for documentation support for enabling instant messaging
>>>>> between endpoints using Asterisk 13.1.0 and vanilla VoIP clients such as
>>>>> Zoiper. Where do I enable this support on the server side and does it need
>>>>> anything on the client side? I see plenty of online help for chan_sip, but
>>>>> nothing for chan_pjsip.
>>>>>
>>>>> I imagine there is both pjsip.conf configuration and extensions.conf
>>>>> configuration?
>>>>>
>>>>> Any help is appreciated.
>>>>>
>>>>> Thanks,
>>>>> Sonny.
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>>                http://www.asterisk.org/hello
>>>>>
>>>>> asterisk-users mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>                http://www.asterisk.org/hello
>>>>
>>>> asterisk-users mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>                http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20151117/f589f75b/attachment.html>