[asterisk-users] DAHDI driver question for custom card

[Roberto Fichera]

Hi All,

Not sure if this is the right mailing list since the dahdi-dev seems not really active, so I'll try here.

I'm developing a new DAHDI driver for a custom board. In this card I've implemented the reading of
the TDM slots by 2 DMA channels, TX and RX. Each DMA channel has its own callback that
decompose the each slot into a per-channel linear buffer useful for calling the related dahdi_transmit()
and dahdi_receive() functions.

The question is, can I call the dahdi_transmit() from the TX DMA callback and the dahdi_receive() from
the RX DMA callback or should use a particular order for them?

Looking at the DAHDI drivers it seems that the sequence is always: dahdi_ec_chunk() -> dahdi_receive()
and then dahdi_transmit().

Thanks in advance,
Roberto Fichera.