[asterisk-users] chan_ooh323 to sip , no connected line info
Dmitry Melekhov
dm at belkam.com
Thu May 14 07:38:34 CDT 2015
by the way, just tried IAX2 between asterisks- the same problem, no
connected line name....
14.05.2015 15:56, Dmitry Melekhov пишет:
> Hello!
>
> We have asterisk connected over PRI no our phone network, so I'm avaya
> PBX user.
> Asterisk connects to another avaya system over h323.
>
> Connection can be shown as
>
> avaya--PRI-asterisk--h323-avaya
>
> When I do call as avaya user I see name of remote end avay user,
> i.e. connected line info.
>
> As I see in debug remote side send is as
>
> 14:07:29:758 Received H.2250 Message = {
> 14:07:29:758 protocolDiscriminator = 8
> 14:07:29:758 callReference = 47
> 14:07:29:758 from = destination
> 14:07:29:758 messageType = 7
> 14:07:29:758 Display IE = {
> 14:07:29:758 Disa
> 14:07:29:758 }
>
>
> over h323.
>
> But now we need to connect to another asterisk over SIP.
>
> in this case we have following :
>
>
> avaya--PRI-asterisk--SIP-asterisk-h323-avaya
>
> i.e. there are two asterisks , which are connected over chan_sip.
>
> In this case I don't get name of remote user, although right asterisk
> receives the same info from avaya,
> but it just doesn't pass it into SIP, as I see from debug.
>
> Could you tell me is it possible to send this info from h323 to sip?
>
> Thank you!
More information about the asterisk-users
mailing list