[asterisk-users] can ooh323 work with cisco router?
s m
sam.gh1986 at gmail.com
Wed May 6 01:58:24 CDT 2015
hello Dmitry
thank you for your reply. Ok, you are right. i want to configure trunk h323
between asterisk 11.13.1 and 2800 cisco router. this is my scenario:
PBX(100)--->cisco--->asterisk11.13.1---->PBX(200)
when i call from 100 to 200, everything is ok but when i call from 200 to
100, phone rings but after i answer it, i have no voice and call terminates
after 5 seconds. this is ooh323 debug(in asterisk11.13.1 system):
ooh323_get_rtp_peer OOH323/peer-2-5 -> (null):0, 1
this ia h322_log:
10:42:10:835 Processing MakeCall command ooh323c_o_3
10:42:10:835 Created a new call (outgoing, ooh323c_o_3)
10:42:10:835 Enabled RTP/CISCO DTMF capability for (outgoing, ooh323c_o_3)
10:42:10:835 Enabled RFC2833 DTMF capability for (outgoing, ooh323c_o_3)
10:42:10:835 Dtmf mode set to H.245(alphanumeric) for (outgoing,
ooh323c_o_3)
10:42:10:835 Dtmf mode set to H.245(signal) for (outgoing, ooh323c_o_3)
10:42:10:835 INFO: FinCall returned 80494a048 for call: ooh323c_o_3
10:42:10:835 INFO: FinCall returned 80494a048 for call: ooh323c_o_3
10:42:10:835 INFO: create cmd connect for call: 80494a048
10:42:10:846 Processing MakeCall command ooh323c_o_3
10:42:10:846 INFO: FinCall returned 80494a048 for call: ooh323c_o_3
10:42:10:846 Parsing destination 192.168.0.139:1720
10:42:10:846 Trying to connect to remote endpoint(192.168.0.139:1720)
(IPv4) to setup H2250 channel (outgoing, ooh323c_o_3)
10:42:10:847 H2250 transmiter channel creation - successful (outgoing,
ooh323c_o_3)
10:42:10:847 Determining IP address for outgoing call in multihomed mode.
(outgoing, ooh323c_o_3)
10:42:10:847 Using local ip 192.168.0.71 for outgoing
call(multihomedMode). (outgoing, ooh323c_o_3)
10:42:10:847 Building OpenLogicalChannel for Receive Capability
(outgoing, ooh323c_o_3)
10:42:10:848 Created new logical channel entry (outgoing, ooh323c_o_3)
10:42:10:848 Receive channel of type audio started (outgoing, ooh323c_o_3)
10:42:10:848 Building OpenLogicalChannel for transmit Capability
(outgoing, ooh323c_o_3)
10:42:10:848 Created new logical channel entry (outgoing, ooh323c_o_3)
10:42:10:848 Added 2 fast start elements to SETUP message (outgoing,
ooh323c_o_3)
10:42:10:848 Built SETUP message (outgoing, ooh323c_o_3)
10:42:10:848 Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:848 Sent Message - Setup (outgoing, ooh323c_o_3)
10:42:10:861 H.225 Call Proceeding message received (outgoing, ooh323c_o_3)
10:42:10:884 H.225 Alerting message received (outgoing, ooh323c_o_3)
10:42:10:884 Built terminal capability set message (outgoing, ooh323c_o_3)
10:42:10:884 Building Facility message for tunneling
OOTerminalCapabilitySet (outgoing, ooh323c_o_3)
10:42:10:884 Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:884 Sent Message - Facility(OOTerminalCapabilitySet) (outgoing,
ooh323c_o_3)
10:42:10:884 Tunneled Message - TerminalCapabilitySet (outgoing,
ooh323c_o_3)
10:42:10:889 H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:889 Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889 Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889 Unsupported data capability type
10:42:10:889 Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889 Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889 Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889 Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889 Built TerminalCapabilitySet Ack (outgoing, ooh323c_o_3)
10:42:10:889 Building Facility message for tunneling
OOTerminalCapabilitySetAck (outgoing, ooh323c_o_3)
10:42:10:889 Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:889 Sent Message - Facility(OOTerminalCapabilitySetAck)
(outgoing, ooh323c_o_3)
10:42:10:889 Tunneled Message - TerminalCapabilitySetAck (outgoing,
ooh323c_o_3)
10:42:10:890 H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:890 Master Slave Determination received (outgoing, ooh323c_o_3)
10:42:10:890 Determining master-slave based on StatusDeterminationNumber
(outgoing, ooh323c_o_3)
10:42:10:890 Built MasterSlave determination Ack (outgoing, ooh323c_o_3)
10:42:10:890 Building Facility message for tunneling OOMasterSlaveAck
(outgoing, ooh323c_o_3)
10:42:10:890 MasterSlaveDetermination done - Master(outgoing, ooh323c_o_3)
10:42:10:890 Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:890 Sent Message - Facility(OOMasterSlaveAck) (outgoing,
ooh323c_o_3)
10:42:10:890 Tunneled Message - MasterSlaveDeterminationAck (outgoing,
ooh323c_o_3)
10:42:10:890 H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:894 H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:894 Listing logical channel 1001 cap 2 state 4 for (outgoing,
ooh323c_o_3)
10:42:10:894 Listing logical channel 1002 cap 2 state 4 for (outgoing,
ooh323c_o_3)
10:42:10:894 Opening logical channels (outgoing, ooh323c_o_3)
10:42:10:894 Looking for matching capabilities. (outgoing, ooh323c_o_3)
10:42:10:894 Created new logical channel entry (outgoing, ooh323c_o_3)
10:42:10:895 Built OpenLogicalChannel-OO_G711ALAW64K (outgoing,
ooh323c_o_3)
10:42:10:895 Building Facility message for tunneling OOOpenLogicalChannel
(outgoing, ooh323c_o_3)
10:42:10:895 Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:895 Sent Message - Facility(OOOpenLogicalChannel) (outgoing,
ooh323c_o_3)
10:42:10:895 Tunneled Message - OpenLogicalChannel(1003). (outgoing,
ooh323c_o_3)
10:42:21:947 H.225 Release Complete message received (outgoing,
ooh323c_o_3)
10:42:21:947 Cause of Release Complete is 10. (outgoing, ooh323c_o_3)
10:42:21:947 Closing H.245 connection (outgoing, ooh323c_o_3)
10:42:21:947 In ooEndCall call state is - OO_CALL_CLEARED (outgoing,
ooh323c_o_3)
10:42:21:947 Cleaning Call (outgoing, ooh323c_o_3)-
reason:OO_REASON_REMOTE_CLEARED
10:42:21:947 Clearing all logical channels (outgoing, ooh323c_o_3)
10:42:21:947 Stopped Receive channel 1001 (outgoing, ooh323c_o_3)
10:42:21:947 ERROR: No Open LogicalChannels - Failed
FindLogicalChannelByChannelNo (outgoing, ooh323c_o_3
10:42:21:947 Removing call 80494a048: ooh323c_o_3
10:42:21:947 Removed call (outgoing, ooh323c_o_3) from list
10:42:21:947 Ending Call Monitor thread
cisco debug shows rtp message with src address 0.0.0.0. i really don't know
how i should fix it. please help me.
thanks
SAM
On Wed, May 6, 2015 at 10:44 AM, Dmitry Melekhov <dm at belkam.com> wrote:
> 06.05.2015 10:06, s m пишет:
>
>> hello every body,
>>
>> i have big problem to configure h323 trunk between cisco router and
>> asterisk 11.13.1 which uses ooh323 module. any body knows if ooh323 module
>> can work with cisco routers or not???? (in gateway mode, it is ok and
>> register in cisco gatekeeper but i can not configure trunk h323)
>>
>>
>> we use chan_ooh323 with cisco for long time with some issues, but...
> only issue is not solved in current asterisk version is
> https://issues.asterisk.org/jira/browse/ASTERISK-24400
>
> so you have to be more specific in your "big problem" description ;-)
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150506/3ab9d7e9/attachment.html>
More information about the asterisk-users
mailing list