[asterisk-users] sipsak 200 for a user, but 404 for a different user...why?

[Andres]

On 2/20/15 2:29 PM, thufir wrote:
> On Fri, 20 Feb 2015 08:46:13 -0500, Andres wrote:
>
>
>> A "sip set debug on" will give you more info on why you are getting the
>> 404.  It probably has to do something with your context/dialplan.
>
> on tleilax:
>
> tleilax*CLI>
> tleilax*CLI> sip set debug on
> SIP Debugging enabled
> tleilax*CLI>
This is showing nothing so I don't think your test message even made it 
here.  I think it looped in the 'doge' server.
>
>
> on doge:
>
> thufir at doge:~$
> thufir at doge:~$ sudo sipsak -vv -s sip:devries at tleilax -m "hi"
> No SRV record: _sip._tcp.tleilax
> No SRV record: _sip._udp.tleilax
> using A record: tleilax
> Max-Forwards set to 0
>
> message received:
> SIP/2.0 404 Not Found
> Via: SIP/2.0/UDP
> 127.0.1.1:56377;branch=z9hG4bK.0edaada3;alias;received=192.168.1.3;rport=56377
> From: sip:sipsak at 127.0.1.1:56377;tag=6b540010
> To: sip:devries at tleilax;tag=as02b0fdd6
> Call-ID: 1800667152 at 127.0.1.1
> CSeq: 1 OPTIONS
> Server: Asterisk PBX 1.8.32.1-vici
> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO,
> PUBLISH, MESSAGE
> Supported: replaces, timer
> Accept: application/sdp
> Content-Length: 0
>
>
>
> ** reply received after 0.844 ms **
>     SIP/2.0 404 Not Found
>     final received
> thufir at doge:~$
>
>
> However, I'm sure you're right that it's the dialplan; I'm looking into
> it.
>
>
> thanks,
>
> Thufir
>
>


-- 
Technical Support
http://www.cellroute.net