[asterisk-users] IAX port

[Jose Flores Galicia]

2015-02-09 14:36 GMT-06:00 jg <webaccounts173 at jgoettgens.de>:
> Hi!
>
> Sometimes IAX peers are not reachable and with "iax2 set debug on" I get
> something like this
>
> Tx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: PONG
>    Timestamp: 00014ms  SCall: 00001  DCall: 01200 79.233.155.174:49153
> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX     Subclass: ACK
>    Timestamp: 00014ms  SCall: 01200  DCall: 00001 79.233.155.174:49153
>
> I am not sure what causes port 4569 to be replaced an an arbitrary port,
> which could be the reason for my problem. Does someone know whether this is
> a router related problem?
>
> jg
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users

Hi.

Port is changed when NAT is applied from LAN to WAN.
While UDP session is maintained as ESTABLISHED, that port should not change.

If your peer changes constantly of session port could be UDP session
is too short in NAT table on routers.
You can try setting qualify=1000 (which is in ms. Default is 2000),
and see if peer keeps same port.

Regards.