[asterisk-users] PJSIP Endpoint AOR question

[Dan Cropp]

Thanks Trey.

Have a great day!

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Trey Hilyard
Sent: Wednesday, April 01, 2015 3:03 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PJSIP Endpoint AOR question

I just realized that you are asking about dynamic AORs, not static Contacts in an AOR. That may be the difference. I have never actually tried giving a dynamic AOR a different name. And you wouldn't want more than one dynamic AOR, you'd just use an AOR that allowed more than 1 contact.

On Wed, Apr 1, 2015 at 2:59 PM Trey Hilyard <kctrey at gmail.com<mailto:kctrey at gmail.com>> wrote:
I don't know why you have issues using different names. I have multiple AORs assigned to a single endpoint and it works fine. I have to admit that my AORs do contain the endpoint name, though. For example, for endpoint "myswitch" I have two AORs, "myswitch_1" and "myswitch_2", and I assign them to the endpoint with aors=myswitch_1,myswitch_2.

When you say that the first example fails, what specifically fails? Do the PJSIP modules load but then you get an error when trying to dial to an endpoint, or maybe receive a call from one?

On Wed, Apr 1, 2015 at 2:53 PM Dan Cropp <dan at amtelco.com<mailto:dan at amtelco.com>> wrote:
I am running asterisk 13.1.0

In pjsip.conf, the endpoint section has an aors and an auth field.

I can name the auth field anything I want.  The key is to set the auth=field accordingly.
However, when I try this with the aors field, it never works.  It seems I have to name the aors=field to match the name of the endpoint section.

Is this correct?

Would there ever be a need for multiple aors to a single endpoint?  Since the field is named aors, I thought this would be possible.  How would I do this if I have to name the aor the name of the endpoint?

This fails...

[transport1]
type = transport
bind = 0.0.0.0
protocol = udp

[aor3]
type = aor
max_contacts = 1
remove_existing = yes

[auth3]
type = auth
username = 1003
password = Password

[1003]
type = endpoint
context = Test
transport = transport1
auth = auth3
aors = aor3
dtmf_mode = inband
device_state_busy_at = 1
disallow = all
allow = ulaw


This succeeds...

[transport1]
type = transport
bind = 0.0.0.0
protocol = udp

[1003]
type = aor
max_contacts = 1
remove_existing = yes

[auth3]
type = auth
username = 1003
password = Password

[1003]
type = endpoint
context = Test
transport = transport1
auth = auth3
aors = 1003
dtmf_mode = inband
device_state_busy_at = 1
disallow = all
allow = ulaw

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/6951b5f4/attachment.html>