[asterisk-users] PJSIP Endpoint AOR question

[Dan Cropp]

Thanks Joshua.

That must be it.  I'm using PhonerLite and a Cisco SPA504G phone.

Have a great day!


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joshua Colp
Sent: Wednesday, April 01, 2015 3:07 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PJSIP Endpoint AOR question

Dan Cropp wrote:
> I am running asterisk 13.1.0
>
> In pjsip.conf, the endpoint section has an aors and an auth field.
>
> I can name the auth field anything I want. The key is to set the 
> auth=field accordingly.
>
> However, when I try this with the aors field, it never works. It seems 
> I have to name the aors=field to match the name of the endpoint section.
>
> Is this correct?
>
> Would there ever be a need for multiple aors to a single endpoint? 
> Since the field is named aors, I thought this would be possible. How 
> would I do this if I have to name the aor the name of the endpoint?

Whether you have to name it the same or not is up to the SIP client registering. Some allow you to specify the AOR you are registering against. Some assume that the username you are authenticating as is the same as your AOR.

Cheers,

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users