[asterisk-users] Asterisk 11.9.0 PRI no ring indications

[Eric Wieling]

Ringback problems are a pain in the neck to troubleshoot.   You don't mention your endpoint, but if the endpoint is sip, play around with the prematuremedia and progressinband options in sip.conf.    The comments for these two settings in sip.conf.sample are completely and totally confuzing.  Try different compications and see if any of them make any difference.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug Lytle
Sent: Thursday, September 18, 2014 7:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk 11.9.0 PRI no ring indications

Doug Lytle wrote:
> I'm also planning, after hours, to move back to 11.12.0 with a make config and start again.  Maybe moving back to 11.9 wasn't a good idea.

Well that didn't work.

Even started with a fresh set of configuration files.  A basic 
chan_dahdi.conf and a basic dahdi system.conf.

Audio passes fine, I can even specify a default music on hold to play 
during the dial (Thinking of playing a ringing sound).  I'm just not 
getting any ringing.

Is it possible the card is bad?

It's a Digium, Inc. Wildcard TE220 dual-span T1/E1/J1 card 3.3V 
(PCI-Express) (5th gen) (rev 02)

Doug

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users