[asterisk-users] Asterisk 11.9.0 PRI no ring indications

[Doug Lytle]

Hopefully someone can point me in the correct direction.

I had a 1.4x system die on me yesterday, while I was prepping a new machine to replace it.  Took the machine on site yesterday and spent the day and part of the evening getting things working.

This morning, I finished up converting my dial plan, knowing there'd be calls of things that I missed.

While testing, I've noted that all inbound and outbound calls over the PRI give no ring indications.  This is my second converted system and the first system doesn't have this issue. The system is out of the Detroit, MI area and the provider is TDS.  

One thing of note:  I originally started off with 11.12.0, but was having problems with paging and the sound card, so I back dated to 11.9.0 (Same as my first convert) after I deleted the /var/lib/asterisk/modules folder.

Machine setup below:

lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 7.6 (wheezy)
Release:        7.6
Codename:       wheezy

uname -a

Linux livasterisk 3.9.11-custom-3.9.11 #1 SMP Thu Jan 9 12:18:01 EST 2014 x86_64 GNU/Linux

dahdi config:

cat system.conf 
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
defaultzone=us
loadzone=us
echocanceller=oslec,1-23

span=2,0,0,esf,b8zs
fxsks=25-32
fxoks=33-48
defaultzone=us
loadzone=us

chan_dahdi:

[channels]
;
;

switchtype=national
context=pri
signalling=pri_cpe
echocancel=yes
echotraining = yes
;echocancelwhenbridged = yes
pridialplan=unknown
group=1
rxgain=-1.0
txgain=-4.0
usecallerid=yes
callerid=asreceived
channel=1-23

Any suggestions would be appreciated!

Doug

-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."