[asterisk-users] Reload problems with 1.8.27 and 11.9.0 - Someone else ?

[Joshua Colp]

Administrator TOOTAI wrote:
> Le 07/05/2014 16:50, Rusty Newton a écrit :
>> On Wed, May 7, 2014 at 2:46 AM, Administrator TOOTAI
>> <admin at tootai.net> wrote:
>>>
>>> I got it: if the filename is given in totality it's working (as you
>>> do it).
>>>
>>> It's the #include </path to directorie>/*.conf which is not taking in
>>> account (here *.conf description)
>> That still works for me as well.
>>
>> I switched to Asterisk 11.9.0 built fresh from a tarball with default
>> compilation options.
>>
>> I contructed a basic sip.conf, and added this line to the end:
>>
>> #include /etc/asterisk/sip_includes/*.conf
>
> Here is the point. Modify it the way explained in previous message, like
>
> #include sip_includes/*.conf
>
> You should face the problem. And if you run it twice in a raw, it will
> do nothing the second time.

Can you clarify this specific point? It's actually expected that if 
nothing changes and you do a reload that nothing will happen. Just so 
we're on the same page here...

#1 Do you mean that you make a change, do a reload, and nothing happens.

OR

#2 That you make a change, do two reloads, and the second one does nothing.

I was under the impression that #1 was going on.

-- 
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org