[asterisk-users] SPA112 provisioning file questions

[Mike Diehl]

Well, I went to an online xml validation site and found an error.  After
correcting the error, my problem is gone!

Thank you.

Mike.


On Thu, Mar 27, 2014 at 2:56 PM, Noah Engelberth
<nengelberth at team-meta.net>wrote:

>  To me, the settings you've sent look correct.  However, one thing I've
> found with SPA configuration files is that they're very picky - if they
> don't parse as valid XML anywhere in the file, it will pretty much silently
> discard the entire file.  The first troubleshooting step I use for SPA
> provisioning is to run all the configuration files a phone should be
> pulling through an XML validator, or pull them up in a browser and see if
> the browser handles it as XML (Chrome or IE seem to work equally well for
> this in my experience, but Firefox can get a bit cranky since the file
> isn't really an XML file with all the normal headers & tags).
>
>
>
> Also, have you verified with logging on the provisioning server that the
> configuration file is actually being pulled?
>
>
>
>
>
> Thank you,
>
>
>
> Noah Engelberth
>
> MetaLINK Technologies
>
>
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Mike Diehl
> *Sent:* Thursday, March 27, 2014 2:47 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] SPA112 provisioning file questions
>
>
>
> Hi all,
>
> I've got a provisioning file that I use to configure Cisco SPA112's.
>
> I'm wanting to get this file to do 3 things for me.  I want to turn T.38
> on, Call forwarding off, and Call waiting, off for both lines.  but it's
> not working.
>
> This is what I'm using to enable T.38 for line 1.
>
> <FAX_Enable_T38_1_>Yes</FAX_Enable_T38_1_>
> <FAX_T38_Redundancy_1_>1</FAX_T38_Redundancy_1_>
> <FAX_T38_ECM_Enable_1_>Yes</FAX_T38_ECM_Enable_1_>
> <FAX_Tone_Detect_Mode_1_>caller or callee</FAX_Tone_Detect_Mode_1_>
>
> This is what I'm using to turn cfwd off on line 1.
>
> <Cfwd_All_Serv_1_>No</Cfwd_All_Serv_1_>
> <Cfwd_Busy_Serv_1_>No</Cfwd_Busy_Serv_1_>
> <Cfwd_No_Ans_Serv_1_>No</Cfwd_No_Ans_Serv_1_>
> <Cfwd_Sel_Serv_1_>Yes</Cfwd_Sel_Serv_1_>
> <Cfwd_Last_Serv_1_>Yes</Cfwd_Last_Serv_1_>
>
>  This is what I'm using to turn call waiting off on line 1.
>
> <Call_Waiting_Serv_1_>No</Call_Waiting_Serv_1_>
>
> However, these setting don't seem be be getting set on the device, even
> after a reboot.
>
> Any ideas what I'm doing wrong?
>
> TIA,
>
> Mike.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140327/6d02d93e/attachment.html>