[asterisk-users] gsm codec compile

[Doug]

Ok got it going. Problem was I didn't do what you said the first time.  When I put 


PROC = arm

at the beginning of the Makefile in  asterisk/codecs/gsm   It compiles fine.

 
Doug Crompton
WA3DSP
http://www.crompton.com




On Monday, March 3, 2014 8:10 PM, Rodrigo Borges Pereira <rodrigoborgespereira at gmail.com> wrote:
 
what about editing makeopts.in to have PROC=arm ?
>
>
>
>
>On Mon, Mar 3, 2014 at 9:48 PM, Doug <dsc3507 at yahoo.com> wrote:
>
>OK set PROC to -
>>
>>
>>OPTIMIZE+=-march=arm
>>
>>
>>and now getting tons of errors in k6opt.s
>>
>>
>>src/k6opt.s:350: Error: bad instruction `psllw %mm3,%mm0'
>>src/k6opt.s:351: Error: bad instruction `movd %mm0,%eax'
>>src/k6opt.s:352: Error: selected processor does not support ARM mode `movw %ax,(%esi)'
>>src/k6opt.s:356: Error: bad instruction `emms'
>>src/k6opt.s:358: Error: bad instruction `popl %esi'
>>src/k6opt.s:359: Error: bad instruction `leave'
>>src/k6opt.s:360: Error: bad instruction `ret'
>>src/k6opt.s:367: Error: unrecognized
 symbol type ""
>>src/k6opt.s:372: Error: unrecognized symbol type ""
>>src/k6opt.s:382: Error: unrecognized symbol type ""
>>src/k6opt.s:384: Error: bad instruction `pushl %ebp'
>>src/k6opt.s:385: Error: bad instruction `movl %esp,%ebp'
>>src/k6opt.s:386: Error: bad instruction `pushl %esi'
>>
>> 
>>Doug Crompton
>>WA3DSP
>>http://www.crompton.com
>>
>>
>>
>>
>>On Monday, March 3, 2014 3:18 PM, Rodrigo Borges Pereira <rodrigoborgespereira at gmail.com> wrote:
>> 
>>Try to set PROC to arm.
>>>
>>>
>>>
>>>On Mon, Mar 3, 2014 at 7:13 PM, Doug <dsc3507 at yahoo.com> wrote:
>>>
>>>I was successful in compiling asterisk in raspbien except for the following error If I enable the gsm codec. It appears there is something in the Makefile n this directory that needs to be changed. Probably involving optimization. Not sure why it does not recognize the processor since it is one that is mentioned in the Makefile.  Any help would be appreciated. 
>>>>
>>>>
>>>>
>>>>make[2]: Entering directory `/usr/src/asterisk/codecs/gsm'
>>>>   [AS] src/k6opt.s -> src/k6opt.o
>>>>Assembler messages:
>>>>Error: unknown architecture `armv6l'
>>>>
>>>>Error: unrecognized option -march=armv6l
>>>>make[2]: *** [src/k6opt.o] Error 1
>>>>
>>>> 
>>>>Here are the lines in the Makefile -
>>>>
>>>>ifeq (, $(findstring $(OSARCH) , Darwin SunOS ))
>>>>ifeq (, $(findstring $(PROC) , x86_64 amd64 ultrasparc sparc64 arm armv5b arm5b armeb hppa2.0 ppc powerpc ppc64 ia64 s390 bfin mipsel
>>>>mips))
>>>>ifeq (, $(findstring $(shell uname -m) , ppc ppc64 alpha armv4l arm5b armv5b armv61 armv7l s390 ))
>>>>OPTIMIZE+=-march=$(PROC)
>>>>endif
>>>>endif
>>>>endif
>>>>
>>>>gcc is -
>>>>
>>>>Thread model: posix
>>>>gcc version 4.6.3 (Debian 4.6.3-14+rpi1)
>>>>
>>>># uname -m
>>>>armv6l
>>>>
>>>>
>>>>Doug
>>>>
>>>>--
>>>>_____________________________________________________________________
>>>>-- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>>               http://www.asterisk.org/hello
>>>>
>>>>asterisk-users mailing list
>>>>To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>>
>>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140303/d58ea6cb/attachment.html>