[asterisk-users] CLID Presentation & Billing Number | Diversion vs. Remote-Party-ID vs. P-Asserted-Id vs. From vs. P-Charge-info

[Positively Optimistic]

Hi Brian,
This is the path that I've started down.  It's a 8-Span Audiocodes Mediant
2000 running 6.4.   Plan to look at the various syslog options today and
see what is available.

Thanks for your input...


On Thu, Jun 26, 2014 at 7:37 PM, Brian LaVallee <b.lavallee at globaltank.jp>
wrote:

> There seem to be a number of places number presentation could go wrong.
>  Since the PRI 'used to' show toll-free numbers correctly, you need to
> look at the gateway.
>
> Can you debug the ISDN message on the gateway?  See how the toll-free is
> being sent to the carrier.
>
> Since you are looking to manipulate the ISDN message via SIP, it all
> comes down to how the gateway handles the desired functions.
>
>
> Sincerely,
> Brian LaVallee
>
> On 6/26/14, 11:24 PM, Positively Optimistic wrote:
> > We're using a Earthlink PRI converted to SIP via a MediaGateway.   I
> assume
> > the mediagateway will convert the headers to something that PRI can
> > understand.
> >
> >
> > On Thu, Jun 26, 2014 at 9:22 AM, Eric Wieling <EWieling at nyigc.com>
> wrote:
> >
> >> It depends on your carrier.    With some carriers, such as Verizon SIP,
> >> you do this using P-Asserted-Identity.  With Verizon SIP, if they can’t
> >> figure out how to bill the call, it will be rejected.
> >>
> >> With Level 3 SIP, you can use From: or PAID but if the number you
> present
> >> to them is not on your account, they will bill the call against the
> >> “failsafe” number on your account.
> >>
> >>
> >>
> >> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> >> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Positively
> >> Optimistic
> >> *Sent:* Thursday, June 26, 2014 10:11 AM
> >> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> >> *Subject:* [asterisk-users] CLID Presentation & Billing Number |
> >> Diversion vs. Remote-Party-ID vs. P-Asserted-Id vs. From vs.
> P-Charge-info
> >>
> >>
> >>
> >> We would like to present a toll free CallerID when making outbound toll
> >> calls.  In the past, when our PRIs were directly connected to a Nortel
> >> CS1000 we could do this, without issue.  Now that the PRIs are front
> ended
> >> by a mediagateway facing asterisk, we can no longer do this.
> >>
> >>
> >>
> >> Is it possible to set the billing number via a SIP header and set what
> >> should be presented as callerid as another header for presentation?
> >>
> >>
> >>
> >> We can't possibly be the only people in the world that has faced this
> >> challenge.   Searching the internet has provided limited results.
> >>
> >> --
> >> _____________________________________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >> New to Asterisk? Join us for a live introductory webinar every Thurs:
> >>                http://www.asterisk.org/hello
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >
> >
> >
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140627/37240b06/attachment.html>