[asterisk-users] Issue with new Te133

[Shaun Ruffell]

On Mon, Jul 14, 2014 at 12:42:34PM -0400, Jerry Geis wrote:
> Have a new TE133 in a dell R320.
> 
> dahdi_cfg -vvv shows:
> DAHDI Tools Version - 2.9.1
> 
> DAHDI Version: 2.9.1
> Echo Canceller(s):
> Configuration
> ======================
> 
> SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
> 
> Channel map:
> 
> Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
> Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
> Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03)
> Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04)
> Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05)
> Channel 06: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 06)
> Channel 24: D-channel (Default) (Echo Canceler: none) (Slaves: 24)
> 
> 7 channels to configure.
> 
> DAHDI_SPANCONFIG failed on span 1: No such device or address (6)
> 
> 
> Not sure why???
> 
> system.conf shows:
>  cat system.conf
> loadzone=us
> defaultzone=us
> 
> 
> span=1,0,0,esf,b8zs
> bchan=1-6
> dchan=24
> echocanceller=mg2,1-6
> 
> 
> I installed from source.
> I am running asterisk 11.10.0
> libpri is 1.4.14
> 
> dahdi modules are loaded with lsmod | grep dahdi
>  lsmod | grep dahdi
> dahdi_transcode         6729  1 wctc4xxp
> dahdi_voicebus         54866  2 wctdm24xxp,wcte12xp
> dahdi                 224134  11
> dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp,oct612x
> crc_ccitt               1717  2 wctdm24xxp,dahdi

Looking at the above, it appears you do not have the wcte13xp driver
loaded.

Check your /etc/dahdi/modules file and add a line to load the
wcte13xp driver.

Cheers,
Shaun

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org