[asterisk-users] busy() not setting PRI_CAUSE

[Justin Killen]

Okay, I think I need a sanity check here - If I call a person that's on the phone, I should get a busy signal.

Now more specifically, a call comes into the pbx via PRI.  The destination dialplan runs busy(20).  Now, the PRI causecode should get set to 17 (user busy) so that the originating end can play a busy tone, correct?

-Justin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140709/8b98a0f1/attachment.html>