[asterisk-users] chan_dahdi.conf sintax

[Eric Wieling]

Once set, settings apply to all following channel => lines until the setting is changed.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ethy H. Brito
Sent: Tuesday, July 08, 2014 1:30 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] chan_dahdi.conf sintax


Hi All

This may be a silly question but...

I have this dahdi_genconf generated file:

; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul  4 22:05:29 2014
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" 
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
context = default ; only applies to channel lines AFTER this point
group = 63 ; only applies to channel lines AFTER this point

; Span 2: WCTDM/0 "Wildcard TDM410P" (MASTER) 
;;; line="32 WCTDM/0/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 32
callerid= ; only applies to channel lines AFTER this point
group= ; only applies to channel lines AFTER this point
context=default ; only applies to channel lines AFTER this point