[asterisk-users] B410P BRI card testing with patgen / pattest

[Rodrigo Borges Pereira]

Hello Russ,

Actually this was with pattest and patgen, not patlooptest. I don't know if
I can use patlooptest with B410P, should I?

Thanks.


On Wed, Jan 29, 2014 at 6:33 PM, Russ Meyerriecks
<rmeyerriecks at digium.com>wrote:

> On Tue, Jan 28, 2014 at 11:56 AM, Rodrigo Borges Pereira
> <rodrigoborgespereira at gmail.com> wrote:
>
> > (.Error 44119): Unexpected result, 255 != 0, 1 bytes since last error.
>
> > Would this be the kind of output that matches a problem card or something
> > may be wrong in my setup? I'm using DAHDI 2.8.0.1.
>
> patlooptest works by sending an incremental sequence of bytes down the
> transmit side (1,2,3,4,...). Then on the receive side, it watches for
> the same sequence.
>
> In this case, you aren't receiving any valid patterns.
> It's likely a configuration error (unless the card is known bad). You
> might try double checking your test procedure.
>
> --
> Russ Meyerriecks
> Digium, Inc. | Linux Kernel Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> direct: +1 256-428-6025
> Check us out at: www.digium.com & www.asterisk.org
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140129/d3383e33/attachment.html>