[asterisk-users] AsteriskNOW with AX1600P card

[Fernando Pizarro]

Hi all!

I'm new with telephony cards and DAHDI drivers. I have installed 
Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too.

I'm following the installation guide of Atcom [1] for AX1600P analogic 
card, modules are loaded

[root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi"
netjet                 14618  0
isdnhdlc                4523  1 netjet
mISDNipac              33989  1 netjet
mISDN_core             73118  3 netjet,mISDNipac
hisax                 410162  0
isdn                  119265  1 hisax
dahdi_transcode         5240  1 wctc4xxp
dahdi_voicebus         49368  2 wctdm24xxp,wcte12xp
dahdi                 207790  15 
xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wcaxx,wctdm24xxp,wcte11xp,wct1xxp,wcte13xp,wcte12xp,dahdi_voicebus,wcte43x,wct4xxp,oct612x
crc_ccitt               1369  4 isdnhdlc,hisax,wctdm24xxp,dahdi

and there is the output of lspci command:

[root at pbx ~]# lspci -vvvvvv -s 02:03.0
02:03.0 Communication controller: Tiger Jet Network Inc. Tiger3XX 
Modem/ISDN interface
         Subsystem: Device b300:0003
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium 
 >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 32 (250ns min, 32000ns max)
         Interrupt: pin A routed to IRQ 12
         Region 0: I/O ports at a000 [size=256]
         Region 1: Memory at fb001000 (32-bit, non-prefetchable) [size=4K]
         Capabilities: [40] Power Management version 2
                 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA 
PME(D0+,D1-,D2+,D3hot+,D3cold+)
                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
         Kernel modules: hisax, netjet

When I run dahdi_genconf I get the following error:

[root at pbx ~]# dahdi_genconf
Empty configuration -- no spans
/usr/sbin/dahdi_span_types: línea 158: cd: 
/sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio
cat: /sys/bus/dahdi_devices/devices/*/location: No existe el fichero o 
el directorio
cat: /sys/bus/dahdi_devices/devices/*/hardware_id: No existe el fichero 
o el directorio
cat: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o 
el directorio
Empty configuration -- no spans
/usr/sbin/dahdi_span_assignments: línea 183: cd: 
/sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio
cut: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o 
el directorio
Empty configuration -- no spans
Empty configuration -- no spans

Which is the better way to install Asterisk NOW? I need install with AX 
card inserted before?

1 - 
http://www.atcom.cn/cn/download/cards/ax1600p/AX-1600P-AXE1600P-Centos6.0-Dahdi-User%20Manual-V1.1-EN.pdf

Thanks for all. Regards.
Fernando.