[asterisk-users] Asterisk 11 and H.323 trunk using OOH323 - is it stable?

[Paul Belanger]

On 14-01-16 03:37 PM, Gergely Kiss wrote:
> Dear List,
>
> I'm about to build an Asterisk 11.7 based PBX from scratch for our company.
> I'm in the middle of the planning phase and it turned out that our VoIP
> provider prefers H.323 protocol for handling voice calls (while SIP is also
> supported as "plan B").
>
> As I never worked with H.323 channels in Asterisk earlier, I'm not sure if
> it's stable enough to be used in production.
>
> Googling about the subject didn't help much, I could only find some old and
> probably outdated information which I don't want to rely on.
>
> Can you please confirm if the OOH323 module in Asterisk 11 is stable enough
> to use for voice calls? No extra functionality is needed, just to be able
> to create a H.323 trunk towards the provider and make and receive a maximum
> of 30 simultaneous voice calls through the trunk.
>
> Thanks for your kind response!
>
Save yourself time / energy and insist using SIP. If your ITSP cannot 
accommodate your request, thank them and look for another provider.

H323 is Asterisk is basically dead, sure there is a module, sure it 
might compile, but you'll be going down the path of zero help.

-- 
Paul Belanger | PolyBeacon, Inc.
Jabber: paul.belanger at polybeacon.com | IRC: pabelanger (Freenode)
Github: https://github.com/pabelanger | Twitter: 
https://twitter.com/pabelanger