[asterisk-users] SPA112 Won't stay up

[Leandro Dardini]

How long is the registration timeout? If the device is behind a
router/firewall, then you need to set a registration timeout lower than the
state table "life" in the router/firewall. I usually set my devices to just
2 minutes and it works almost all the time. Most Cisco devices have a very
long timeout of 3600 seconds.

Leandro


2014-02-06 17:18 GMT+01:00 Mike Diehl <mdiehlenator at gmail.com>:

> Hi all,
>
> I have an SPA112 that in sitting behind a Ubee cable modem.  The internet
> link is solid, but the device becomes unreachable within a day or so of
> being rebooted.  Then the customer goes to reboot the device, they report
> that all 4 lights are lit.  The ISP reports that the device does respond to
> ping, so it's not completely dead.  I've had the same symptoms with
> SPA303's sitting behind Ubee modems.
>
> So, is there some configuration setting on the SPA that I can set to make
> this device more stable?
>
> Mike.
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140206/d34deeab/attachment.html>