[asterisk-users] Connect to remote GW

Tue Feb 4 12:56:22 CST 2014

If SIP channel driver needs to connect to a remote GW over a dedicated SIP trunk BUT the remote GW has a 'standby' in case of failure, how can the sip configuration file be configured for the remote GW when there are actually two IP addresses. If the main remote GW fails control automatically switches to the standby GW, so how could the SIP configuration file hande this switch and support both host IP addresses. There is no DNS so straight IP addressing is used.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140204/67b7a0c3/attachment.html>