[asterisk-users] PJSIP configuration question

[Dan Cropp]

Thanks George.

I will correct my local_net in the morning.

Vitelity chan_sip settings I have working, do not have a fromuser.
sip.conf settings...

[HVout]
type=friend
dtmfmode=auto
host=64.2.142.93
disallow=all
allow=ulaw
canreinvite=no
trustrpid=yes
sendrpid=yes
nat=yes
context=TestApp



On Dec 15, 2014, at 9:32 PM, George Joseph <george.joseph at fairview5.com<mailto:george.joseph at fairview5.com>> wrote:



On Mon, Dec 15, 2014 at 7:34 PM, Dan Cropp <dan at amtelco.com<mailto:dan at amtelco.com>> wrote:
I am not sure if I entered the correct settings for the transport information.
For the local_net, I entered my local ip address, but no mask.  I will check with the network admin so he can verify the settings I entered.

You need the network and mask.  For example if the ip address and mask of the test machine is 192.168.0.1/255.255.255.0<http://192.168.0.1/255.255.255.0> then the correct entry would be 192.168.0.0/24<http://192.168.0.0/24>.

One minor detail, we are using ip authentication.  When Vitelity changed my account from user based authentication to IP based authentication, they stopped including a user for the account.

Should these settings work without the from_user (IP based authentication) or do I need to get the account name from Vitelity?

You definitely need the master account login username.  If you has this working with chan_sip, then try the 'fromuser' from sip.conf and user is from_user.




Have a great day!

Da

From: asterisk-users-bounces at lists.digium.com<mailto:asterisk-users-bounces at lists.digium.com> [mailto:asterisk-users-bounces at lists.digium.com<mailto:asterisk-users-bounces at lists.digium.com>] On Behalf Of George Joseph
Sent: Monday, December 15, 2014 7:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PJSIP configuration question

Ok Dan, try this...  I was able to get this to work behind a NAT and with ip address authentication.

[global]
type = global
debug = yes
[transport1]
type = transport
bind = 0.0.0.0
protocol = udp
local_net=<yourlocalnet I.E. 10.10.10.10/24<http://10.10.10.10/24>>
external_media_address=<your public ip address>
external_signaling_address=<your public address>

[outbound.vitelity.net<http://outbound.vitelity.net>]
type = aor
remove_existing = yes
qualify_frequency = 60
contact = sip:64.2.142.93
[outbound.vitelity.net<http://outbound.vitelity.net>]
type = endpoint
context = TestApp
transport = transport1
aors = outbound.vitelity.net<http://outbound.vitelity.net>
dtmf_mode = rfc4733
force_rport = yes
rtp_symmetric = yes
rewrite_contact = yes
send_rpid = yes
trust_id_inbound = yes
disallow = all
allow = ulaw
direct_media = no
from_user=<your main vitelity account name>  ; Not subaccount
[outbound.vitelity.net<http://outbound.vitelity.net>]
type = identify
endpoint = outbound.vitelity.net<http://outbound.vitelity.net>
match = 64.2.142.93

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20141216/346fc59a/attachment.html>