[asterisk-users] PJSIP configuration question

[Dan Cropp]

Thank you Joshua.

I will make the modifications this morning and give it a try.

Have a great day!

Dan



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joshua Colp
Sent: Wednesday, December 10, 2014 7:27 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PJSIP configuration question

<snip>

>
> I translated those settings to the following for pjsip.conf...
>
> [transport1]
> type = transport
> bind = 0.0.0.0
> protocol = udp
>
> [outbound.vitelity.net]
> type = aor
> remove_existing = yes
> contact = sip:64.2.142.93 at 5060

This is incorrect. The contact should be:

contact = sip:64.2.142.93

It will use a default port of 5060.

I also believe I've covered your origination issue in a separate email. 
Your dial string should be:

PJSIP/8005555555 at outbound.vitelity.net

Cheers,

--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users