[asterisk-users] Connecting Asterisk and BT Versatility PBX via NT BRI

[Roberto Fichera]

On 08/04/2014 05:02 PM, Roberto Fichera wrote:
> On 08/04/2014 04:29 PM, Mc GRATH Ricardo wrote:
>> Roberto 
>>
>> Could you provide more details about Panasonic PBX test? model unit and configuration details?
> It's a KX-TD1232 model. The conf is nothing special! It's exactly the same used to connect the
> BT Versatility. So it uses a PTP port setup. I've just discovered only one problem regarding this
> PBX, once I dial the dahdi NT port it will answer after 15sec of delay. I'm actually investigating
> this problem.

I've found the problem. It was the overlapdial=true setting. Once removed, the PBX started
ringing pretty instantaneous once placed a call over the NT port!

Cheers,
Roberto Fichera.

>
> Cheers,
> Roberto Fichera.
>
>> Best regards
>>
>> Mc GRATH Ricardo
>> E-Mail mcgrathr at mail2web.com
>