[asterisk-users] Asterisk to Microsoft Lync2013?

[Tony Mountifield]

In article <CAHE6+j31hYcOmyS=kgKv+Ge2p+zr-sgFyN2XcmNpMxEw_hYcsQ at mail.gmail.com>,
Ishfaq Malik <ish at pack-net.co.uk> wrote:
> On 11 April 2014 11:34, Tony Mountifield <tony at softins.co.uk> wrote:
> 
> > Are they any gotchas to be aware of in getting Asterisk and Lync 2013
> > talking to each other using SIP? Or is Lync a pretty standard
> > implementation
> > of SIP?
> 
> You have to use TCP for transport and you need to define the host and port
> address in your peer config and then secure it with ACL.

Thanks, Ish. That's a little inconvenient. Does Lync not support standard UDP?

I have two boxes that need to talk to Lync. One is Asterisk 11, which should
pose no problem with TCP, but the other is a legacy Asterisk 1.2 box, which
is UDP only, I believe.

> Regards
> 
> Ish
> -- 
> 
> Ishfaq Malik
> Department: VOIP Support
> Company: Packnet Limited

Cheers
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org