[asterisk-users] Direct DAHDI documentation

[Gary]

Hello,

I wanted to switch from using Dialogic/Eicon cards to using Digium's T-1 cards. When I purchased a sample card the salesperson assured me there was documentation specific to the DAHDI interface. Now that I'm digging in, I'm finding it's documented a lot like Linux -- one must read the fairly uncommented source code.

I don't have a problem with this generally, but here I just don't understand the divisions of labor between Asterisk, DAHDI Hardware, DAHDI kernel modules and Userland (me). (BTW, I do not wish to use Asterisk as we have numerous projects based on Dialogic/Eicon spanning some 20 years. My intent is to write a replacement look-a-like driver which uses Digium's cards instead of Dialogic's.)

My specific issues are:

 1) HDLC. Does the hardware have an HDLC controller, or is it the user's job to hunt for flags, frame the data and calc the FCS?

 2) ISDN/PRI. Does the kernel module load Q.921/931 implementation or is this user's responsibility? I know there's a LIBPRI product, which I may use, but I have my own PRI library which was confirmance tested with ATT years ago. Either way, I'm not sure how the D-channel data is flowing.

 3) I got the idea that B-channel data is collected by the kernel module in 8 sample blocks (1 ms). Does this mean I need to be reading it out/writing it in at that rate? I saw some buffering code, but wasn't sure if that was voicefile type playback/record or if all audio is treated without regard to its source/destination. I guess I could lock onto it at 1ms using Linux's HPET timer, although that sounds clumsy.

 4) I can certainly convert between ulaw/linear to sum for conferencing, but it seems the kernel module might support that as well? Or at the least it seems the kernel module can support chan-to-chan connections.

 5) I found some DTMF (FIR goertzel) code somewhere in DAHDI, but also in Asterisk. While I have such code in own library, am I to understand DTMF can be detected within the kernel module?

I guess I really would like to see a doc on the overall concept of DAHDI hardware and its kernel module. I don't care how it's laid out, I'd just like to get my mind around it. Does anyone know of an example telephony C file that might show:

1) initialization of DAHDI spans
2) waiting for inbound events
3) answering a call
4) sending a voice file, recording a voice file
5) disconnection of calls
6) de-initialization

And perhaps showing how two channels are connected to create a conversation?

Thanks in advance,
Gary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130930/10d4e723/attachment.html>