[asterisk-users] Asterisk TON number

Wed Sep 25 09:37:32 CDT 2013

So you are using QSIG and connecting your Asterisk box to a legacy PBX over
PRI E1?

Did you try "unknown"?
Do you need to use QSIG (over euroisdn for instance)?

Thanks,
Steve Totaro

On Wed, Sep 25, 2013 at 10:33 AM, Endri Stefani <endri.stefani at plus.al>wrote:

>  Hi Steve,****
>
> ** **
>
> There are no errors I need to be able to change TON(below my PRI debug )
> in international or subscriber. The change in chan_dahdi.conf did not do it
> ****
>
> ** **
>
> > Calling Number (len= 8) [ Ext: 0  TON: National Number (2)  NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)****
>
> >                           Presentation: Presentation permitted, user
> number not screened (0)  '1000' ]****
>
> > [70 0c a1 30 30 36 36 39 31 31 30 30 30 30]****
>
> > Called Number (len=14) [ Ext: 1  TON: National Number (2)  NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)  'xxxxxx' ]****
>
> ** **
>
> ** **
>
> Br****
>
> ** **
>
> ** **
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Steve Totaro
> *Sent:* Wednesday, September 25, 2013 4:24 PM
>
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] Asterisk TON number****
>
>  ** **
>
> I asked you before.  What exactly are you trying to do that you cannot?
>  It helps to be fairly detailed when asking a question to the list.
>  Include error messages if you have any.****
>
> ** **
>
> The dialplan and your ISDN configs are different things.  It sounds like
> maybe you are having issues with with your dailplan and pattern matching.
>  You can probably do all of that from the Trixbox GUI.  If you like
> Trixbox, check out FreePBX since Trixbox is done.  ****
>
> ** **
>
> Thanks,****
>
> Steve Totaro****
>
> ** **
>
> On Wed, Sep 25, 2013 at 9:30 AM, Endri Stefani <endri.stefani at plus.al>
> wrote:****
>
> Hi guys****
>
>  ****
>
> Thanks a lot, I am just getting used to it, my telco managers J don’t
> trust stability for open source solution for voice(you give a headache to
> calling parties if lag is more than 250ms J ) and I want to prove them
> wrong. I have successfully integrated * with our system via ISDN and first
> calls look fast and clear but it is required to be flexible with TON number
> in order to be used. I tried unloading and loading chan-dahdi.conf like
> Hans suggested with no success TON was not changed.****
>
> Here is my chan_dahdi.conf, is there anything else I should do in order
> for new pridailplan came into action :****
>
>  ****
>
> ;****
>
> ; DAHDI telephony****
>
> ;****
>
> ; Configuration file****
>
>  ****
>
> [trunkgroups]****
>
>  ****
>
> [channels]****
>
>  ****
>
> switchtype = qsig****
>
> context = pri_incoming****
>
> group = 0****
>
> signalling = pri_cpe****
>
> channel => 1-15,17-31****
>
>  ****
>
>  ****
>
>  ****
>
> ;language=en****
>
> ;context=from-zaptel****
>
> ;signalling=fxs_ks****
>
> ;rxwink=300              ;****
>
> ; Whether or not to do distinctive ring detection on FXO lines****
>
> ;****
>
> ;usedistinctiveringdetection=yes****
>
>  ****
>
> usecallerid=yes****
>
> hidecallerid=no****
>
> callwaiting=yes****
>
> usecallingpres=yes****
>
> callwaitingcallerid=yes****
>
> threewaycalling=yes****
>
> transfer=yes****
>
> cancallforward=yes****
>
> callreturn=yes****
>
> echocancel=yes****
>
> echocancelwhenbridged=no****
>
> echotraining=400****
>
> rxgain=0.0****
>
> txgain=0.0****
>
> group=0****
>
> callgroup=1****
>
> pickupgroup=1****
>
> immediate=no****
>
>  ****
>
>  ****
>
> ;faxdetect=both****
>
> faxdetect=incoming****
>
> ;faxdetect=outgoing****
>
> ;faxdetect=no****
>
>  ****
>
> ;Include setup-pstn configs****
>
> #include dahdi-channels.conf****
>
>  ****
>
> group=1****
>
>  ****
>
> ;Include PBXconfig configs****
>
> #include chan_dahdi_additional.conf****
>
>  ****
>
>  ****
>
> unknown:        Unknown****
>
>  private:        Private ISDN****
>
>  local:          Local ISDN****
>
>  national:       National ISDN****
>
>  international:  International ISDN****
>
>  dynamic:        Dynamically selects the appropriate dialplan****
>
>  redundant:      Same as dynamic, except that the underlying number is not
> ****
>
>                  changed (not common)****
>
>  ****
>
> pridialplan = international****
>
> prilocaldialplan = international****
>
>  ****
>
>  ****
>
>  ****
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *$$ dave cantera
> (android asus)
> *Sent:* Wednesday, September 25, 2013 2:46 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion****
>
>
> *Subject:* Re: [asterisk-users] Asterisk TON number****
>
>  ****
>
> if you are a serious teleco guy, which it seems you are. you might
> consider dumping trixbox in the near future. while trixbox does provide a
> good entry level into the * world, there are limitations that will
> eventually hold you back from enjoying the full breadth of utility that *
> offers.****
>
>
> food for thought,
>
> Dave Cantera
> (856)813-7098 mobile/txt
> david.cantera at ibsonecall.com
>
> Sent from my ASUS Pad
>
> Steve Totaro <stotaro at totarotechnologies.com> wrote:****
>
>  ****
>
>  ****
>
> On Wed, Sep 25, 2013 at 3:22 AM, Endri Stefani <endri.stefani at plus.al>
> wrote:****
>
> Hi****
>
>  ****
>
> Greeting to all you out there.****
>
>  ****
>
> I am new at asterisk, I have been working with PLMN platforms
> telecommunication for 5 years with NSN and Huawei.****
>
> We have recently built an asterisk PBX with Trixbox and connected it to
> our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are
> tons of information out there, except for the TON number.****
>
> If you have worked in Telecommunication you will know the importance of
> TON flexibility. ****
>
> All the posts online suggested to update under Chan_dahdi.conf:****
>
> pridialplan = international****
>
> prilocaldialplan = international****
>
> or other TON value ,restart the platform and then trixbox1*CLI> dialplan
> reload****
>
> I have already done this with no success. Are there other changes I have
> to make in order to change dialplan?****
>
>  ****
>
>  ****
>
> Br****
>
>  ****
>
>  ****
>
> So what are you trying to do specifically?****
>
>  ****
>
> Thanks,****
>
> Steve Totaro ****
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users****
>
> ** **
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130925/ae02835b/attachment-0001.html>