[asterisk-users] Asterisk TON number

[Eric Wieling]

chan_dahdi.conf.sample, included in the Asterisk source code, suggests pridialplan=unknown.  The CALLERID() functions has a couple of options for setting "num plan", but the options are not well documented.

; PRI Dialplan: The ISDN-level Type Of Number (TON) or numbering plan, used for
; the dialed number.  Leaving this as 'unknown' (the default) works for most
; cases.  In some very unusual circumstances, you may need to set this to
; 'dynamic' or 'redundant'.
;
; unknown:        Unknown
; private:        Private ISDN
; local:          Local ISDN
; national:       National ISDN
; international:  International ISDN
; dynamic:        Dynamically selects the appropriate dialplan using the
;                 prefix settings.
; redundant:      Same as dynamic, except that the underlying number is not
;                 changed (not common)

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Endri Stefani
Sent: Wednesday, September 25, 2013 3:23 AM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] Asterisk TON number

Hi

 

Greeting to all you out there.

 

I am new at asterisk, I have been working with PLMN platforms telecommunication for 5 years with NSN and Huawei.

We have recently built an asterisk PBX with Trixbox and connected it to our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are tons of information out there, except for the TON number.

If you have worked in Telecommunication you will know the importance of TON flexibility. 

All the posts online suggested to update under Chan_dahdi.conf:

pridialplan = international

prilocaldialplan = international

or other TON value ,restart the platform and then trixbox1*CLI> dialplan reload

I have already done this with no success. Are there other changes I have to make in order to change dialplan?

 

 

Br