[asterisk-users] Sip-Client / type=peer / Why can this client place calls?

[Steve Totaro]

On Tue, Sep 3, 2013 at 8:11 AM, Thorsten Göllner <tg at ovm-group.com> wrote:

> Hi,
>
> I am using Asterisk 11.5.1. As far as I understood, the following
> configuration allows a sip client only to receive calls (type=peer) but not
> to place calls (http://www.voip-info.org/**wiki/view/Asterisk+sip+type<http://www.voip-info.org/wiki/view/Asterisk+sip+type>).
> Why can I place calls though with this config?
>
> sip.conf
> ...
> [thorsten]
> type=peer
> host=dynamic
> context=my_context
> nat=force_rport,comedia
> secret=...
> dtmfmode=rfc2833
> disallow=all
> allow=g722
> allow=g729
> allow=g729
> ...
>
> extensions.conf
> ...
> [my_context]
> exten => _X.,1,Dial(DAHDI/g1/${EXTEN},**60)
> ...
>
> Of course: when removing a valid context the client can not place the
> call. But I thought this behaviour can be controlled via "type=peer"?!
>
> Thanks in advance
> -Thorsten-
>
>
See if this is helpful.

http://www.voip-info.org/wiki/view/Asterisk+SIP+user+vs+peer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130903/bcc7bb16/attachment.htm>