[asterisk-users] Unix connections not always disconnecting

[Paul Belanger]

On 13-11-07 10:31 AM, Ishfaq Malik wrote:
> On 7 November 2013 15:26, Gareth Blades <mailinglist+asterisk at dns99.co.uk>wrote:
>
>> On 07/11/13 11:20, Ishfaq Malik wrote:
>>
>>> Hi
>>>
>>> We are using asterisk 1.8.23.1
>>>
>>> We have a script that runs on a minute cron which polls the asterisk
>>> server for 3 bits of information by using
>>>
>>> asterisk -rx 'command'
>>>
>>> which then gets pushed to a graphite server we have
>>>
>>> 99% of this runs smoothly.
>>>
>>>
>>>
>> Out of interest what are you trying to monitor?
>>
>> We tend to use cacti for graphing and snmp provides all the information we
>> require.
>>
>>
>>
> Active calls, sip peers connected, sip peers disconnected and then breaking
> all of those down by customer as we run a multi tenanted set up.
>
> SNMP would give us totals but I don't think it would do the breakdown by
> customer.
>
You should avoid using the CLI to access that information. You'd likely 
getter better results using AMI or CEL.

-- 
Paul Belanger | PolyBeacon, Inc.
Jabber: paul.belanger at polybeacon.com | IRC: pabelanger (Freenode)
Github: https://github.com/pabelanger | Twitter: 
https://twitter.com/pabelanger