[asterisk-users] 3. mfcr2 channel state IDLE 0x00 and call trace log file not ended ?? (Leonardo Rivanera)

[Mc GRATH Ricardo]

Hi Leonardo

At first should be useful to post your message at asterisk-r2-request at lists.digium.com group.
By the other way let me advice, to make an explained detail of your problem as;
Asterisk version
Openr2 version
Configurations files
Dialplan dahdi pattern detail 
Detail of the call process (inbound or outbound call failed?)
In case of outbound call failed
extension dial 
wait time  of the call process (waiting for ringback tone, busy, reorder, silence etc)
call trace log (for better collect information, you could move or delete old data log on /var/log asterisk/.....)
In case of inbound call failed, it could be possible with call log and monitoring bit CAS signalling

Based on your explanation and information could let you know the possible reason of the weird issue.

By the other way, let me explain when  dahdi restart, it make hardware reset, therefore will stop card control software and restart again, these will cause lost frame connection between you box and PSTN, and call process, etc.
When dahdi restart again it recover frame between both side and set CAS control channel according to dahdi parameters setting on system.conf
These is for preventing to let to PSTN start call handler process during asterisk starting process or stop.
Another point it seems on your log information a call have been answered,  so it seems is working.

Good luck   
PD: 0x00 it doesn't mean idle state (it mean force release)
Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com